CityTurbo.com

Hi I have some honda city parts i am wanting to sell Please text or call as i dont read the fourm much thanks 0407628612 Honda city pro t engine and box compleate with everything has new water pump and new clutch less than 5000 ks old. engine was running real good before it was removed $200 ono Hond...

I hope someone will be able to point me in the right direction; My T2 has just developed a miss which seems to be happening under load and the weird thing is it is not constant, it will happen near the top of the rev range sometimes and sometimes as i flatten it lower in the revs ,(turbo runs a con...

Any one got any Fender mirrors for a city or know anything that is close?
PM or email me
[email protected]

3GCVC wrote:I have a spare T1 and T2 motor both suitable for parts if you cant find them else where and need to get them shipped from here.

Pm sent thanks Dean

Is the gear on the cam broken or the gear on the oil pump shaft? The gear on the cam is part of the cam, you would have to replace the whole cam shaft if it is this one which is broken. Supposedly the cam gear and pump shaft gear are a matched pair, so you should not replace one without replacing t...

Try going and seeing the folk at Batalion Motors, 70 Townsville St Fyshwick (02) 6280 6022. I understand they have some good older honda engine knowledge. Thanks for that I know jason from Batalion Motors. He is a great help,and knows his early Hondas but says he has not seen city turbo motor for a...

you should be able to pick up a used cam and pump drive from someone... maybe shipped from NZ would be the best bet.. if not, check this thread.. bart got a new cam ground up for his NA http://www.cityturbo.com/forums/viewtopic.php?t=3200 i would be worried about your bearings too, if they were sta...

I have spent a long time on the forum but getting useful info/ can take a long time and a lotof if from so long a go. So where can you get parts for these things?/whats still available? How can i get any translated workshop manual? Any one like to give a detailed procedure on removal/replacement cam...

Hi I have a t2 motor that has lost oil pressure while idling. I turned it off straight away as I saw the oil light flicker and loud knocking from motor. I have started it one more time but it has only run for 20 seconds like this and no load at all. Anyway I thought the oil pump had failed, but I re...

Hi i am interested in parts
call dean 0407628612

1984 pro t motor runs great, no leaks, new water pump
offers 0407628612

HI ,IM VERY INTERESTED IN YOUR HONDA PLEASE LEAVE A CONTACT OR CALL DEAN 0407638612. THANKS

hey mate if city still 4 sale call Dean 0407628612 or leave contact number