Search found 44 matches

by twin_c's
Tue Apr 10, 2012 10:53 pm
Forum: General
Topic: cam gear
Replies: 4
Views: 4545

cam gear

hi all just wondering if the cam gear of an eb1,2or3 or any other e series motor would fit the standard cam on a city. this is because the civic 1200 cam gear can be easily modified into an adjustable gear using a piece of plate and bolts (found on http://www.1stgencivic.com/1stgeneration_civic/hp_1...
by twin_c's
Thu Apr 05, 2012 10:07 pm
Forum: General
Topic: I'm developing a performance suspension package for City's
Replies: 297
Views: 248390

let us know when there ready . also how much would just the fronts (complete with springs) be posted to Brisbane Australia
by twin_c's
Thu Mar 29, 2012 7:53 pm
Forum: General
Topic: Went to the wreckers today, here is my haul, rarish parts??
Replies: 4
Views: 5353

hi how much would you want for the shop manual?
by twin_c's
Sun Mar 18, 2012 9:35 pm
Forum: General
Topic: Air filter
Replies: 5
Views: 4837

hi coops the filter assembly is a tfi racing (part no. 446-101) which was $44.95 from autobarn. to compensate for the lack of a breather fitted to the filter housing base you will need to drill a 16mm hole in the base and fit a 1/2 x 3/8 bsp male elbow $15.95 (tfi racing part no. BME1238) and a 1/2 ...
by twin_c's
Sat Mar 17, 2012 8:20 pm
Forum: General
Topic: Air filter
Replies: 5
Views: 4837

Air filter

Hi all if your chasing better throttle response out of a N/A city purchase a 2-5/16 mount Stromberg performance air filter assembly these clamp straight on. did this to my car this morning and there was a notable increase in throttle response.
by twin_c's
Wed Feb 08, 2012 8:32 pm
Forum: General
Topic: ED Civic Brake Upgrade.
Replies: 6
Views: 5708

Thanks guys! :) I'll have a look one day, it's not a major worry for me and considering the whole lot cost me <$200 I can't complain, I was gonna spend nearly half that just to renew the old seals and put some new pads in. Now its just a matter of sorting out some sway bars :S The little rocket hol...
by twin_c's
Tue Feb 07, 2012 4:46 pm
Forum: General
Topic: distributor cap problem... where to get one
Replies: 6
Views: 9828

I know the picture is not correct ... http://www.ebay.com.au/itm/220755731613?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 Would it be the correct one based on the Technical Information they have provided? I see they they do & don't post to Australia? Best to contact them I think. pro...
by twin_c's
Tue Feb 07, 2012 4:41 pm
Forum: General
Topic: ED Civic Brake Upgrade.
Replies: 6
Views: 5708

i would try some new rotors and see if the shutter goes away. if it is still present i would say that there is some extreme runout somewhere (probably the spacer not sitting flat) take it to a brake shop for them to look at and get there opinion. all in all thank you for the info
by twin_c's
Fri Nov 11, 2011 4:53 pm
Forum: General
Topic: Rear springs
Replies: 2
Views: 3016

yeah the ba1/2. dont know in comarision to good rear springs but it lifts the rear up when they replace sagged springs, my tires were a good 1 - 1 1/2 inch under the guard before the springs were replaed
by twin_c's
Thu Nov 10, 2011 3:39 pm
Forum: General
Topic: Rear springs
Replies: 2
Views: 3016

Rear springs

hi all had a look around for rear spring replacment as my ones where sagged causing the 185's fitted to scrub out on a decent corner or when had more the 2 people in it. only springs i found which where the closest are set of rear springs from a 86-89 prelude. king springs make this when ordered, $1...
by twin_c's
Wed Oct 26, 2011 10:22 am
Forum: General
Topic: Tuner ? Honda Accord?
Replies: 4
Views: 4475

Re: Tuner ? Honda Accord?

what does it mean when people are "dropping pounds" (or something like that) in their tuners ? also how can i make my 95 honda accord 4door faster ? please include parts, price range, order of importance/most beneficial, etc. ==================== the term "dropping pounds" means...
by twin_c's
Mon Oct 24, 2011 12:54 pm
Forum: General
Topic: Turbo replace/upgrade....
Replies: 1
Views: 2540

if you have the money i would recommend a garret GT1241 might take a little modification to fit but its for 400-1200cc capacities so it should pick up pretty quickly and not choke up as the motors redline is around 6000rpm. on the flip-side of the coin you might loss high end power marginally but sh...
by twin_c's
Mon Aug 08, 2011 9:57 pm
Forum: General
Topic: retrofitting twin carbs
Replies: 0
Views: 3661

retrofitting twin carbs

hi recently purchased a pair of keihin CV carbs of a d15b4 powered civic as i have a preference to the su type carbies as they give a more accurate metering of fuel under all rev ranges. have ran into the problem trying to work out how to plumb the vacuum lines and wire in the solenoids to get them ...
by twin_c's
Mon Aug 08, 2011 9:38 pm
Forum: General
Topic: fitting a msd
Replies: 0
Views: 3538

fitting a msd

hi just wondering if anyone here has any experience in installing either a msd 6al/2 or the msd street fire ignition system into a 8v pro t

Go to advanced search