CityTurbo.com

I am in the same boat,with a t2 in Perth,I was going to try W.A suspensions.I did see an old thread about use front struts fro a flat back[early] civic and a cartridge from ?a polo drops in.James[N.Z] will eventually build some fantastic adjustable coilovers

well done getting a t2 back on the road,it would be good to get a few cars together in perth,do you know when the oz honda cruise is alternatively Caleb could coordinate something?my car should be on the road end juy

If your stuck,in perth take it to overboost in malaga.Brian or Mick are the guys.To find them you have to drive to the address[they almost never answer the phone]they open about 1030 am,and there is no signage on there building the address is correct so drive,get out and walk and listen. My t2 was o...

Hi I have a quaife lsd in a t2 box ,it was the same as gingernuts and ?turbocab got in 07.My car is in the final stages of being started this week.We have problems with the old immobilizer and anothr and some other mystery piece of gear on the fuel side which looks like an oxy acetalene guage.will p...

I could do with a t2 box,any idea of shipping costs to Perth

caleb who is on the forum or myself have some spare turbos.but i don't know the condition of mine as they came as spares,we are both in perth

Hi james,I would be keen to send some money for the second set after turbocab,when you are ready,I bought a set of shocks/springs of 3gvc last year as it would be too hard to exchange from aust, when i bought some fog lights.I am unsure how far away you are from 3gvc for the exchange bits.My t2 engi...

unfortunately it was back together when i took the camera around but may be able to get the dimensions of speedo ring and post.Material removed was less than a mm of alloy inside the gearbox housing but angle grind the outer edges of the allen keys down to level with the internal hole in the allen k...

have fitted the little sucker,just needed a few shavings of alloy from inside the gearbox housing, and the outer edges of the of the allen keys buzzed as they are what fouls on the housing.Quaife recommend putting locktite on the allen keys when they are torqued up .the only tricky bit was a metal r...

Glad the move is over and there is a glimmer of light for some suspension development,I'm trying to develop a t2 for verteran car club racing,In western australia they have round the house racing in some country towns so up against minis,cortinas.Hence the interest in suspension. The 24mm swaybars s...

I rang the compaNY LISTED ON THE WEBSITE and the swaybays are 24mm and the price is just under 250 AUD nonadjustable or 300 AUD adjustable so no need to hurry and buy of e-bay and they can make them up I'm not sure how thick the original swaybars are[my cars are 100klm away from were I mainly live]w...

Any news from N.Z on suspension kits?
an old post said gen1[72-79] civic struts fit and koni cartridges fit ,? are these adjustable?any suggestions

reassembling a t2 box and it looks like it should have aspring/ ballbearing reverse gear lockout,there is a wear mark but the spring appears to be missing.
there are 3 other lock outs on the other rail.Does any one know if there was a fourth

did you have to machine out the housing or take some metal off the mugen centre

about to try and fit a quaife lsd[a la gingernuts] we have concerns about the speedo takeoff and general dimensions of this box,It looks alot different to a t1'anyhelp appreciated.have pm'd turbocab