CityTurbo.com

that sucks balls

i have the 'marine clean'.. which is just like a prep wash
and the 'metal ready'

seems POR15 is real anal about application, doesnt like moist air either (which sucks for me at the moment)

what prices are you looking at?

what kind of bearings do you have as well? just ACL?

there was like .5-1mm of play though.. thats the weird thing, wasnt just jammed on solid.

guess i need another wheel now anyway :p

stumbled across the Hyundai G4HC 1L engine..

ring specs:
66.00mm
compression rings 1.2mm
oil ring 2.5mm


if could get in moly they would be great

just a pic of some of the parts: http://i44.tinypic.com/2ahto52.jpg ACL F10A +.5mm rings ACL thrustbearings :/ Couple of magnetic drain plugs for the box and sump nice GMB japanese made waterpump Honda crank seals and 88c thermostat with gasket Last timing belt in the country too (old school honda p...

any info on the model years the disc and calipers are off..

do you know if it is a direct bolt in?

(mitch with gen1 crx yeah?)

the jaycar boost controller has a good rep here..
but anyway

pulled the cam today, so the head and the block are ready for machining. Here is my work area: :lol: http://i44.tinypic.com/2rm2r7q.jpg annoyingly, the machinist i have been in contact with said it wont be able to be done for around 5 weeks. So dont know what direction to go with that. Had a better ...

hi colby this thread has more info: http://cityturbo.com/forums/viewtopic.php?t=2223&start=75 Basically the gaskets are made by an aussie company AA Gaskets http://www.aagaskets.com.au/ And you can order the gasket kits from typical auto stores here in Australia and in NZ. But it seems supply is...

*dw*

minor update.. just stripped down the block today with just the bare internals left in there. Ready to goto a machine shop one i have finalised a few details. Still need to pull the cam from the head.. and also pull the rear heater pipe off the block.. anyone know what the method is? Simply pull it ...

Hey, i have seen a post from charles about the installation of ARP Rod bolts into a t2 (part #208-6001). he said that the girdle needs to be modified.. Anyone know the specifics? Is it just that some of the metal in the girdle needs to be removed to make clearance for the rods, because the bolts are...

Hi guys, just though i would ask your opinion in relation to the current forum structure. When i was looking for info about honda citys before i purchased my t2, i was glad to find this site. However i found the forum structure to be quite unattractive with the info messed all together in the genera...

how did the u fit the d series crx box in there?

i presume a gen2 crx.. d16a8 88-91?

Had my last exam a couple of days back, so getting stuck into the city during my break. Bought a MIG so i am quite poor.. as well as a bunch of heaps of things like cheap air tools, masks etc. Rigged up a little chain hoist setup :twisted: http://i42.tinypic.com/iyewcz.jpg Disconnected a lot of thin...