CityTurbo.com

You should be able to find figures for checking both coil and leads in the infobase, sure I posted them sometime. Sounds like fuel to me, I have some carby info if you need it.

I have seen pictures on here in the past of a white and a red T11 with body kits fitted (not the racer one) but can't seem to find them now, can someone tell me where to find them, post a picture, or pm me and I'll give you an address to email them to. I've been going to try making a set for a while...

John's turbo is from a T1, Quote for a rebuild in Adelaide is around $900. I looked up turbo sites a while back and found rebuild kits for those turbos so don't see that you should be having a problem. Balancing would be a big issue if you tried to do it yourself.

Why?

Hey Bigelboe and Kartracer, managed to find a couple on a carburetted version of the Combax motor, will post again if they are not suitable. Thanks anyway.

You shouldn't have any trouble getting it rebuilt, try a better turbo shop!

All City doors are the same, may just need to weld the trim holes in some of them.

Thanks bigelboe or anyone else that can help, they should have a free standing over-all length around 29mm-29.5mm. A couple of mine have gone short and are out of spec.

I am in need of two CVCC valve springs to finish my engine rebuild, anyone out there have any? Any help appreciated. Thanks

I can confirm what the "T's" have said here, John took me around the block once, it was a while back but I can remember that it didn't take long. The ride seemed a bit choppy at the time but I don't know what stage the suspension mods were at. This thing really pulls, and torque steer is q...

Heath, my manifold is sitting on the bench at the moment if you want to check anything, give me a yell

Why not just get it fixed, probably just needs new brushes, did mine last week, cost $5

Hyper, as far as I know you are correct, T11 has 7mm stem and 24mm head . If that's the same then a T1 will do.

You've all been very quiet on this one, someone out there must have a spare or two lying around, It's the only bit I need to find for my rebuild, have everything else sorted. Hope someone can help. thanks.

I'll try to get an English one up but my computer doesn't always understand me!!