Search found 411 matches

by Henry
Tue Aug 15, 2006 1:19 pm
Forum: General
Topic: cyl sensor
Replies: 14
Views: 13345

Unplug it, check the resistance between the red & white (horizontal pins) and between the brown & blue (vertical pins) should be between 0.65 and 0.85 K ohms. Insulation resistance between each terminal and the sensor housing should be 100K ohms or more. Be very carefull if you open it up, t...
by Henry
Mon Aug 14, 2006 1:29 pm
Forum: General
Topic: ER Turbo pistons and rings set
Replies: 8
Views: 11629

DR86, The rings fitted to my T11 were Suzuki, ACL part no PS1678 +.5mm to fit my standard bore.
by Henry
Sun Aug 13, 2006 6:44 pm
Forum: General
Topic: radiators
Replies: 5
Views: 6415

My ProT has the cap on the extreme left and the top hose at the extreme right (looking from the front) My T11 has the cap on the extreme right, (on a riser to clear the intercooler) and the top hose just left of centre. (looking from the front also) Both bottom hoses come out on the left side.
by Henry
Fri Aug 11, 2006 8:18 pm
Forum: General
Topic: spoted white t2 ?
Replies: 3
Views: 5121

That was probably Richard, pm me with your movements, we might be able to catch up.
by Henry
Thu Aug 10, 2006 8:18 pm
Forum: General
Topic: radiators
Replies: 5
Views: 6415

yes, the hoses come out in different places
by Henry
Wed Aug 09, 2006 6:39 pm
Forum: For Sale / Wanted
Topic: wtd: radiator
Replies: 3
Views: 4484

I've had a couple re-cored,looked at that option?
by Henry
Sun Jul 30, 2006 6:10 pm
Forum: General
Topic: starter motor
Replies: 3
Views: 5714

Why not just get it fixed?
by Henry
Sat Jul 29, 2006 10:30 pm
Forum: General
Topic: where is the engine number on T2 engine ????
Replies: 6
Views: 8177

Big Elbow, thanks for clearing that up. On my T11 the blanks on your diagram are; Centre of firewall (the 7 oclock arrow) Model No E-AA printed on a plate, vin no stamped on. Above sensor box (the 8 oclock arrow) Vin No stamped on bodywork. Under Bonnet (9 oclock arrow) mine has vacuum diagram but a...
by Henry
Wed Jul 26, 2006 9:08 pm
Forum: General
Topic: Front Wheel Bearings '84 T1 City
Replies: 1
Views: 3109

All bearings have a number on them, if you take one to a good bearing shop,(in Aus someone like CBC) they should be able to match them up. Your's are probably the same as the ProT.
by Henry
Mon Jul 24, 2006 12:03 am
Forum: General
Topic: australian built T1! ???
Replies: 16
Views: 20499

That seems to be the same body kit that is on KIWI's city, his doesn't have the different grille but the rest looks the same including the bonnet scoop. He has pictures in the Garage.
by Henry
Wed Jul 19, 2006 9:48 pm
Forum: General
Topic: car burnin heaps of engine oil
Replies: 6
Views: 7570

When I pulled my pistons out the compression rings expanded but the oil ring stayed about piston size, I think Boostboy had a similar thing with his.
by Henry
Tue Jul 18, 2006 8:09 pm
Forum: General
Topic: car burnin heaps of engine oil
Replies: 6
Views: 7570

They seem to have a common problem of gumming up the oil rings while the compression rings still seal, compresion test may not tell you the full story but is a good place to start
by Henry
Sat Jul 15, 2006 10:37 am
Forum: General
Topic: Engine Numbers in the Info Base
Replies: 7
Views: 6517

I have some info here that seems to say that
T11 engine numbers start at ER-5100001
Transmissions at GR-9100001, and
Frame at AA-1400001
by Henry
Thu Jul 13, 2006 8:43 pm
Forum: General
Topic: ER Turbo pistons and rings set
Replies: 8
Views: 11629

DR86, they didn't show the part No on the invoice but will see if I can find out for you.
by Henry
Thu Jul 13, 2006 8:40 pm
Forum: General
Topic: What tha .......
Replies: 7
Views: 7635

Is this something that just started or has it gotten worse gradually? Is it more likely to happen on a hot day? Once it happens does it remain a problem for the rest of your trip? Does it perform normally the next morning? Make sure you don't keep trying to boost it while it's playing up (unless you...

Go to advanced search