CityTurbo.com

^ Koni red style, remove spring and top hat, compress the shaft fully and adjustment is done by turning the shaft left hand for softer right hand for harder, Pretty simple just requires disassembly to do. Quite often Reds can be converted to yellows with external adjustment I think. As they are Koni...

Just something I thought of, perhaps try changing that "plastic hose" line from the solenoid's map sensor to a silicone or rubber one. Years ago I had that same type of pipe for a boost gauge and it used to completely collapse from the vacuum / heat and may be effecting the signal to the E...

more pics / vids ^??

Perhaps 1G integra DOHC EFI brake rotors, and CA3 accord brake calipers they are twin spot and have some seriously good stopping power.

You would also need to upgrade the master cylinder,

PM me if you would like more details for this swap or i may even have some of the parts lying around.

sounds like a brake booster problem.

I would suggest replacing it with a unit from the same vehicle or can you not source one locally?

so the gas station gave you dirty gas?

The above link has a T2 engine pictured not T1 as they mentioned on the add good to know they know what they are selling lol I also have a good working T2 motor with 92,000 genuine kms on it here in New Zealand and have past experience with exporting motors so could arrange it. PM me if your interes...

I think an exhaust shop would charge around 4-600 for the 2.5inch exhaust in mild steel, mandrel bends will be extra but would flow better, I would suggest upgrading the dump pipe as well as most of the exhaust restriction is before the cat converter, You will want a 2 or 2.5inch piece of pipe made ...

This is coming along really nicely,

i think option 1 for plate placement looks best. dead centered at the bottom.

BUMP have another boost controller as above available.

nah im using them cause the conversion to OBD1 is too complicated when old HKS gear will run the car just fine.

I do have a spare additional injector controller though that i can sell (HKS of course) if that might help with what you want to do,

also let me know if you still want those springs.

HKS FCON is the easiest way there are still a few floating around, With the FCON it has maps till the map sensor maxes out, which is a 2.5bar sensor i believe well enough to do what you want i have one here and a HKS FCD that i have yet to play with as i haven't had time. stock old tired fuel pump w...

I have a spare rear wheel cylinder and also the whole rear hub assembly,

PM me if you still need it.

not sure if you can put the handling down to wheel / tire choice 185 60s shouldnt have too much roll, I have 13x5.5 + 38 offset with huge profile tires and it still handles pretty good with the KYB shocks You can probably go down to +20-25 offset to fill out the guards without rubbing but good luck ...