LOC: Wheelers Hil, VIC
contact: 0419 004 097 or [email protected]
EDIT = all parts open to negotiation on price, trying to clear everything, some parts now gone.
- 1.2 carb pro t Engine for sale $50
- Radiator w/bottom hose & fan $20
- Left Door complete, no major dents, paint faded - suit good polish, mould in good cond. no int arm rest.
- Right Door complete, no major dents, paint faded - suit good polish,
mould in good cond.
- Bonnet, suit respray - free for pick up
- Various interior trims & dash parts
- 2 x side view mirrors in good cond. $15 each or $25 pair
- Rare rear AUNGER sun velour - free to good home
- Front and rear wiper assemblies & motors $10 a wiper arm or $40 for lot incl. motors
- Speaker Grills & elcheapo speakers $10 lot
- Wiper Washer bottle/motors $10
- Front fold down grill - faded but GC - $10
VIC: City Pro T Parts For Sale
-
- Forum Regular
- Posts: 71
- Joined: Tue Feb 22, 2005 8:29 pm
- Location: Melb
VIC: City Pro T Parts For Sale
Last edited by trustpower on Fri Aug 18, 2006 10:23 am, edited 5 times in total.
-
- Forum Regular
- Posts: 71
- Joined: Tue Feb 22, 2005 8:29 pm
- Location: Melb
-
- Forum Regular
- Posts: 71
- Joined: Tue Feb 22, 2005 8:29 pm
- Location: Melb
- city_racer
- Forum Enthusiast
- Posts: 237
- Joined: Sat Feb 04, 2006 2:57 pm
- Location: melbourne australia
- city_racer
- Forum Enthusiast
- Posts: 237
- Joined: Sat Feb 04, 2006 2:57 pm
- Location: melbourne australia
-
- Forum Regular
- Posts: 71
- Joined: Tue Feb 22, 2005 8:29 pm
- Location: Melb
Hey, came out of a car with approx 40,000kms on odometer, so could have been round once or twice.
Was running fine when i pulled it out.
It doesnt have the distributor cap, or carby on it at the moment.
And ive got the vac advance off it in a box somewhere too.
I can supply the engine with alternator, and a carby for it, also air cleaner setup for an extra $20.
But for the most part it's complete - manifolds, pumps, etc all still on.
The engines got a fair oil build up around it, so may require a rocker cover gasket and maybe a sump gasket, which is very easy to do with the engine out. I'll clean it all down next week anyways.
Engine oil is drained from it.
Also don't have an oil filter on it, but to get it in the engine bay you usually have to take the filter off, so you'd be best to get your own filter.
Also, not supplying flywheel/clutch or rear mount. Can supply side mount at no extra cost.
Its got plugs in it but dunno the cond. of them.
Its pretty cheap, i just don't have a use for it anymore, got another project car now, so my City's just a daily.
at $50 for an engine, you can probably afford to spend a bit of money on it, or keep as a spare if you need parts off it - manifolds, internals etc.
I can crane it into a ute or waqon, but need some notice.
Was running fine when i pulled it out.
It doesnt have the distributor cap, or carby on it at the moment.
And ive got the vac advance off it in a box somewhere too.
I can supply the engine with alternator, and a carby for it, also air cleaner setup for an extra $20.
But for the most part it's complete - manifolds, pumps, etc all still on.
The engines got a fair oil build up around it, so may require a rocker cover gasket and maybe a sump gasket, which is very easy to do with the engine out. I'll clean it all down next week anyways.
Engine oil is drained from it.
Also don't have an oil filter on it, but to get it in the engine bay you usually have to take the filter off, so you'd be best to get your own filter.
Also, not supplying flywheel/clutch or rear mount. Can supply side mount at no extra cost.
Its got plugs in it but dunno the cond. of them.
Its pretty cheap, i just don't have a use for it anymore, got another project car now, so my City's just a daily.
at $50 for an engine, you can probably afford to spend a bit of money on it, or keep as a spare if you need parts off it - manifolds, internals etc.
I can crane it into a ute or waqon, but need some notice.
-
- Forum Regular
- Posts: 71
- Joined: Tue Feb 22, 2005 8:29 pm
- Location: Melb
- city_racer
- Forum Enthusiast
- Posts: 237
- Joined: Sat Feb 04, 2006 2:57 pm
- Location: melbourne australia
-
- Forum Regular
- Posts: 71
- Joined: Tue Feb 22, 2005 8:29 pm
- Location: Melb
City Racer, I haven't seen the centre console on a PRO T before, but ive seen something on an import before from memory.
What I do have, is a black tray with cup holders that is designed to sit on the tunnel rise to the gear lever, its got spikes underneath it and grip ripples under the side pads to hold it onto your carpet.
Came out of a civic, but i've used it in my City plenty of times before.
Its in good condition with no major damage or marks.
Youre welcome to that for $15 (pick up).
See the PIC below
I've also got a few spare fold down pen trays that you see some PRO T's fitted with, dunno bout the imports. $10 a tray, all black, one good one, one has part of the hinge broken, but still works fine and is free to good home
What I do have, is a black tray with cup holders that is designed to sit on the tunnel rise to the gear lever, its got spikes underneath it and grip ripples under the side pads to hold it onto your carpet.
Came out of a civic, but i've used it in my City plenty of times before.
Its in good condition with no major damage or marks.
Youre welcome to that for $15 (pick up).
See the PIC below
I've also got a few spare fold down pen trays that you see some PRO T's fitted with, dunno bout the imports. $10 a tray, all black, one good one, one has part of the hinge broken, but still works fine and is free to good home
- city_racer
- Forum Enthusiast
- Posts: 237
- Joined: Sat Feb 04, 2006 2:57 pm
- Location: melbourne australia
Who is online
Users browsing this forum: No registered users and 51 guests