(WTB) City Turbo II Crank..
(WTB) City Turbo II Crank..
Well I finally got the wife's car all back together, she was breaking it in and then it happened.. bottom end knock Pulled it apart and she spun a main bearing The block is getting line honed, but it looks like it's in need of a new crank In the mean time I bought a city turbo II front cut, and it should be here tomorrow, so I can get her back on the road again, But I would like to have the original as a rebuilt back up... anybody have a crank they wanna sell?
- James
- Moderator / Donating Member
- Posts: 3092
- Joined: Wed Apr 09, 2003 1:59 pm
- Location: Putaruru
- Contact:
I just pulled the crank out of a T2 engine about 20 mins ago, now I have to decide whether I want to keep it as spare or sell it to you
The engine wasn't in very good nick, I could feel the play in the big ends with my fingers, not sure how the crank journals were, didnt really check. I probably need to get a micro meter onto it and check the roundness and dia of the things on the crank
The engine wasn't in very good nick, I could feel the play in the big ends with my fingers, not sure how the crank journals were, didnt really check. I probably need to get a micro meter onto it and check the roundness and dia of the things on the crank
-
- Forum Enthusiast
- Posts: 270
- Joined: Tue Jan 20, 2004 8:47 am
- Location: Dunedin
Ti crank and flywheel also available
Hi I have a used T1 crank in Dunedin may be able to get it to Compton CA for cheap and you arrange the rest of freight from there. Its a spare one free happy to oblige. Came out of a running car. I feel unless yours is cracked you would be better metal spraying journals etc if anything needs doing over there????
- James
- Moderator / Donating Member
- Posts: 3092
- Joined: Wed Apr 09, 2003 1:59 pm
- Location: Putaruru
- Contact:
One thing I noticed while pulling apart the motor is everything that is unique to the honda city turbo 2 has PD1 stamped into it, this is Hondas internal code for them, this includes block, pistons, rods, manifolds, ECU's.
Everything that came from other cars has different internal codes, the waterpump housing is PA0, and something else has some other number on it, but Ive forgotten, Ill go grab the oil pump and check it it has any stampings.
PD1-Z stamped on it, Im pretty sure that means its unique to the city turbo.
Everything that came from other cars has different internal codes, the waterpump housing is PA0, and something else has some other number on it, but Ive forgotten, Ill go grab the oil pump and check it it has any stampings.
PD1-Z stamped on it, Im pretty sure that means its unique to the city turbo.
Who is online
Users browsing this forum: No registered users and 256 guests