WANTED - Distributor
WANTED - Distributor
If anyone has one that they want to sell please let me know. I live in brisbane.
- JohnT
- Donating Member
- Posts: 177
- Joined: Sat Aug 10, 2002 6:16 pm
- Location: Adelaide South Australia
Re: WANTED - Distributor
Civic_killer
I have a distributor spare if you still need one. Henry recently borrowed it to check out some issues with his City and sent me an email saying:
John, your distributor has been tested. It's had a bit of a hard life, the centrifugal advance mechanism operates but could do with a clean out (dry grease) the vacuum section was quite gritty, cleaned it out and re-greased but still not smooth. Vac advance canister is shot, centre (coil) contact broken in the cap but have replaced that, fitted my vac canister and it is now on test and performing same as mine, so it's now a useable item. I guess the only bit that could pack up in there is the igniter but that is ok. Will fit T1 or T11. Will put a note with it when I bring it back.
So if you still need. let me know. In this condition we're talking $50 plus freight - which will be around $20.
John
I have a distributor spare if you still need one. Henry recently borrowed it to check out some issues with his City and sent me an email saying:
John, your distributor has been tested. It's had a bit of a hard life, the centrifugal advance mechanism operates but could do with a clean out (dry grease) the vacuum section was quite gritty, cleaned it out and re-greased but still not smooth. Vac advance canister is shot, centre (coil) contact broken in the cap but have replaced that, fitted my vac canister and it is now on test and performing same as mine, so it's now a useable item. I guess the only bit that could pack up in there is the igniter but that is ok. Will fit T1 or T11. Will put a note with it when I bring it back.
So if you still need. let me know. In this condition we're talking $50 plus freight - which will be around $20.
John
Who is online
Users browsing this forum: No registered users and 269 guests