WTB New set of Turbo City piston rings
Posted: Wed Nov 19, 2014 9:19 pm
Has anyone got a set of new piston rings that they are not going to use now & are wanting to sell. I don't need pistons as i've got spares but i need rings. Photo shows why 
CityTurbo.com
Home of the mighty Honda City Turbo!
https://www.cityturbo.com/forums/
WTB New set of Turbo City piston rings
Page 1 of 1
Re: WTB New set of Turbo City piston rings
Posted: Thu Nov 20, 2014 3:55 am
hey mate think i have some
Re: WTB New set of Turbo City piston rings
Posted: Wed Nov 26, 2014 6:48 am
KingCity wrote:Has anyone got a set of new piston rings that they are not going to use now & are wanting to sell. I don't need pistons as i've got spares but i need rings. Photo shows why
When I did my rebuild we used Suzuki rings with the pistons needing minor machining to suit. I couldn't find originals at the time (5 years ago), it wasn't too badly priced at the time.
If you do find originals let us know where you found them!
Re: WTB New set of Turbo City piston rings
Posted: Wed Nov 26, 2014 4:00 pm
Yep will do. Last time i got rings was when i first replaced rings & bearings in this engine about four years ago. I had to buy two sets of Grant rings from the states as one set used black coated steel compression rings & the correct oil ring & the other set had the right stainless steel compression rings but incorrect oil ring. It was the more expensive way of doing it but for my other engine i had the piston lands re-grooved to suit a common ring type, i can't remember what they were.