T1 parts required

Buy and sell Honda City's and Parts (Honda City's only please!)
gen1hybrid
Forum Participant
Posts: 35
Joined: Fri Feb 21, 2003 11:33 am

T1 parts required

Postby gen1hybrid » Thu Mar 20, 2003 1:57 pm

Howdy.

Im looking for the following parts if anyone can help......

MAP sensor control box and a loom.

Cheers
Darcy
:D

kenny
Forum Enthusiast
Posts: 127
Joined: Mon Feb 17, 2003 1:31 am
Location: perth wa
Contact:

Re: T1 parts required

Postby kenny » Fri Mar 21, 2003 12:21 am

what does the MAP sensor control box look like?? might have one.

thanks kenny

BOOSTBOY
Forum Addict
Posts: 366
Joined: Wed Mar 27, 2002 11:28 pm
Location: Victoria Australia

Re: T1 parts required

Postby BOOSTBOY » Fri Mar 21, 2003 5:19 pm

The big black box at the rear drivers corner of the engine bay with all the hoses going into it...  :)

User avatar
JohnT
Donating Member
Posts: 177
Joined: Sat Aug 10, 2002 6:16 pm
Location: Adelaide South Australia

Re: T1 parts required

Postby JohnT » Tue Mar 25, 2003 1:53 pm

The MAP sensors themselves are the two black square looking devices with three wires going into each, that are mounted inside the metal tray with all the vacuum hoses going in. (about 3 cm * 3 cm * 2 deep) Round plugs (one white, one green) on the MAP sensors.

You also need the trim resistor that has again three wires coming from a squarish plug, this is a round devide that is again screw mounted in the metal tray. There is an adjusting screw inside this which drives a ??mixture?? setting.


The rest of the gear inside that metal tray isn't essential, although it is good to have an idle up solenoid, but they are a dime a dozen from the wreckers - Honda used to use them all over the place.

John


Return to “For Sale / Wanted”

Who is online

Users browsing this forum: No registered users and 50 guests