Original wheels
Original wheels
Restoring '83 T2. I need the double 3-hole original cast wheels in good shape. There must be a lot of these around because every T2 has new wheels. Are the originals 13X5? I will drive with another set of new wheels to use 195/60 tyres (maybe). I also need to know of a wheel/tyre dealer in NZ that knows which combinations worK. What is the fattest tyre I can use on 6, 7, or 8 inch wide rims? Will any 14 inch rims work? I want max cornering on wet , no spinouts. My T2 in the paintshop now! Engine runs sweet, I am afraid to mess with it, but hope for clutch, exhaust, and brake upgrades soon.
-
- Forum Regular
- Posts: 90
- Joined: Fri Aug 16, 2002 10:53 am
- Location: Mount Maunganui, New Zealand
- Contact:
Re: Original wheels
Hiya Dog
I'm running 195/50 15's. You could possibly go a little wider if you went to 16's or 17's with an even lower profile but you wouldn't get much more. The sizes I've gone with give the same as standard rolling radius so gearing/revs remains as standard.
Cheers
Tony ;D
I'm running 195/50 15's. You could possibly go a little wider if you went to 16's or 17's with an even lower profile but you wouldn't get much more. The sizes I've gone with give the same as standard rolling radius so gearing/revs remains as standard.
Cheers
Tony ;D
Re: Original wheels
Original wheel specs are 5-J x 13 Tyres 185/60R13 mine has original Honda wheels , pictures are in the Members rides section. Henry
Re: new wheels
I'd like to go to 14 inch or 15 inch wheels for my T2. When I shop for wheels, what specs to state? What is the hole pattern? how much offset will work and stay in the fenders without rubbing? How wide can the wheels be? I like the idea of the 195/50/15s, anybody have pictures? I'm looking for a steel-black 5 spoke design. Where can I shop for those in NZ? Can I shop online? Should I go rally tread pattern for best results on wet pavement? How noisy are agressive tread tyres? Thanks, yelodog
Re: Original wheels
On that last: I didn't mean steel wheels! I meant titanium-look dark gray or black cast aluminium! I think I'll go with 15 inchers, but what rim width or offset? What tyres will give same diameter as my current 185 60R13? Or would a tiny bit more diameter be OK? Thks yd
-
- Forum Addict
- Posts: 609
- Joined: Mon Mar 03, 2003 11:50 am
- Location: christchurch, NEW ZEALAND!!
- Contact:
Re: Original wheels
man you ask a lot of questions.. each rim size you go up you decrease side wall height for instance on my t2 i run 195/65/13 yeah i know, a little bit baloonie but hey it sticks like dogg shit (aye)
195/65/13 - 205/60/13
195/55/14 - 205/50/14
195/45/15 etc
195/35/16 "
195/25/17 "
i'm pretty sure thats how it goes, the way to work out your side wall height is.. take the width of your tyre and divide it by two which for 195 gives you 97.5 then you divide that number by the side wall height turned into a percentage of 100, i.e 65 becomes .65
e.g 195 / 2 = 97.5
97.5 x .65 = 63.5(mm (side wall height)
63.5 x 2 = 126.75(mm(total side wall height)
126.175 + 325mm(rim diameter) = 452.17(total
ride
height)
anyway thats what i was taught if its wrong take it up with chch polytech who made me pay 1800 to learn that
195/65/13 - 205/60/13
195/55/14 - 205/50/14
195/45/15 etc
195/35/16 "
195/25/17 "
i'm pretty sure thats how it goes, the way to work out your side wall height is.. take the width of your tyre and divide it by two which for 195 gives you 97.5 then you divide that number by the side wall height turned into a percentage of 100, i.e 65 becomes .65
e.g 195 / 2 = 97.5
97.5 x .65 = 63.5(mm (side wall height)
63.5 x 2 = 126.75(mm(total side wall height)
126.175 + 325mm(rim diameter) = 452.17(total
ride
height)
anyway thats what i was taught if its wrong take it up with chch polytech who made me pay 1800 to learn that
Who is online
Users browsing this forum: No registered users and 236 guests