hey all... as topic states.. might be able to get my hands on a set of wheels cheapish.. want to know if they'll fit on a city T1. as I'm interested in Crooky's T1 and a set of mags would go good i reackon!!!
THanks
ANdy
15" x 6.5" WILL THEY FIT T1
-
- Forum Enthusiast
- Posts: 261
- Joined: Wed Mar 26, 2003 1:34 am
- Location: Brisbane
Re: 15" x 6.5" WILL THEY FIT T1
I reckon they would fit as long as the PCD, centre bore and offset are all right. If they came off a Honda they would probably fit. Centre bore approx 56mm, offset 45mm, PCD 4x100
-
- Forum Enthusiast
- Posts: 261
- Joined: Wed Mar 26, 2003 1:34 am
- Location: Brisbane
Re: 15" x 6.5" WILL THEY FIT T1
well did a quick search found a few links that seem to say 15's will fit ok.. one or two say 16's will fit on a TII but dunno about a TI.. I'll find out about offset etc... they're def 4x100.. hmmm...
Re: 15" x 6.5" WILL THEY FIT T1
Its all gonna depend on what tyres you get for them. Something like a 195 50 15 should be fine, but if you need to you can go even lower and go for a 195 45 15. Go to a tyre place, they will put you right.
-
- Forum Addict
- Posts: 609
- Joined: Mon Apr 01, 2002 2:02 am
- Location: Newcastle, NSW Australia
Re: 15" x 6.5" WILL THEY FIT T1
Dunno bout T1, but i've driven a lowered T2 with 16' mags. was running 215 by 45 profile... Was sweet as!
-
- Forum Regular
- Posts: 90
- Joined: Fri Aug 16, 2002 10:53 am
- Location: Mount Maunganui, New Zealand
- Contact:
Re: 15" x 6.5" WILL THEY FIT T1
I wouldn't think they'd fit on a T1, I was running 195/50 15's on a cab (same rear guards as a T2) and they only just fitted, without the wider guards I'm guessing even if they did fit they'd rub badly. I wouldn't have had more than 10mm between the rim and suspension arm on the inside so there's not a lot of room to move in the offset either.
Cheers
Tony ;)
Cheers
Tony ;)
Re: 15" x 6.5" WILL THEY FIT T1
I dont like your chances on a T1. We had 14inch wheels (i dont know offset etc) but they only had 175/60 on and we had to roll the guards.. it was ok, but when it was lowered the back used to scrub on the inside of the guards.. only on landings for jumps, or if there was someone in the back though
it was a bit toight eh!
it was a bit toight eh!
Re: 15" x 6.5" WILL THEY FIT T1
a friend of mine works at speedy wheels and he told me the max that will fit on with out suspenstion work would be the 15 x 6.5. but you will need a set of super low profile tyers. like 20's to 30's 4 the profile width. i'm getting a set of 5 hyper fang chrome mags at 15 x 6.5 with a 4 x 100 stud patten. go to speedywheels.com to have a look at the range. another good set would be the high speed racing-black, white or if you want the wrx look the gold. well hope that this helps you out.
-
- Forum Enthusiast
- Posts: 261
- Joined: Wed Mar 26, 2003 1:34 am
- Location: Brisbane
Re: 15" x 6.5" WILL THEY FIT T1
hahaha yeah well I might just get what I can I think.. 14's should look pretty good with a reasonably low profile. anyways mags might have to wait until I pay off the car.. oh did I mention I've decided to get Crooky's car.
Who is online
Users browsing this forum: No registered users and 64 guests