105kmph Beeper

[Muppet]

How do you easily disconnect the speed warning beeper as it is starting to drive me CRAZY.

ANy advice would be greatly apricated.

[James]

Pull out the instrument cluster, its a few screws and shit, then find the little black thing with two wires going to it on the back of the cluster that looks like a beeper (will look kinda like this
http://www.dse.co.nz/cgi-bin/dse.storefront/426ef4a70a793d6e273fc0a87f990767/Product/View/L7022 )
and cut them, this is a bit abbrieviated but if you know much about anything you should be able to sort it out ;D

[Tony]

Shouldn't even need to pull out the cluster, just remove the top cover and its on the back of the cluster on the left hand side.  I've done a few and normally just leave it in place and cut the black wire with a small pair of side cutters...

;D

[Muppet]

Sweet as. Thanks for the help. ;D ;D

It won't affect any thing else will it?

[1982_civic_wagon]

stay on the speed limit ;D. i know itl be hard

[turbocab]

all good except when the limit is 110
ime going to kill my meeper soon too i think

[jjcale]

You guys Rock!

Just got a T1 registered and was scratching my head about this one.
No auto electrician for me today.

[Muppet]

Haven't got round to disconnecting mine yet, but sometimes it works and sometimes it doesn't, same with the factory turbo gauge, could this be related? ??? ???

[James]

Both things will be related to broken solder joints on the gauges, theres a post in the infobase i think about how to resolder your boost guage...

[Muppet]

Finally got round to disconecting mine today and how simple do Honda make it to disconect, unplug two wires and your done.
Its amazing that I didn't see it the first time I had the dash apart-silly me ;D ;D