wheel bearing part no

Post whatever you like in here but try to keep it Honda City related!
turbocab
Donating Member
Posts: 1536
Joined: Wed Sep 01, 2004 12:23 pm
Location: Central coast nsw

wheel bearing part no

Postby turbocab » Fri Jan 05, 2007 1:50 pm

hi all
ive tried searching and got nowhere.
after replacing the knuckles on my car the left hand side has developed a nasty rattle & shudder and ide say the right hand side isnt far off.
can anyone tell me the part no for the wheel bearings on a t2
thanks matt

Henry
Moderator / Donating Member
Posts: 422
Joined: Sat Apr 20, 2002 10:30 pm
Location: Adelaide

Postby Henry » Fri Jan 05, 2007 8:26 pm

Matt, the bearing itself will have the manufacturers name and his part No on it and any good bearing shop should be able to match it with a suitable replacement. I've never changed one but you will probably need access to a press.

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Sun Jan 07, 2007 8:29 pm

You only need a bit of pipe to remove the bearings but you need a press to replace them. They will be a standard wheel bearing size, repco should carry a kit.

turbocab
Donating Member
Posts: 1536
Joined: Wed Sep 01, 2004 12:23 pm
Location: Central coast nsw

Postby turbocab » Sun Jan 07, 2007 9:06 pm

turns out the nuts on the left wheel had worked themselves loose :oops: so the bearings should be sweet for a while.

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Mon Jan 08, 2007 8:04 am

Haha nice one, everyone has to do it once.

turbocab
Donating Member
Posts: 1536
Joined: Wed Sep 01, 2004 12:23 pm
Location: Central coast nsw

Postby turbocab » Mon Jan 08, 2007 10:21 pm

i swear i did them up tight
:idea: or did i?


Return to “General”

Who is online

Users browsing this forum: No registered users and 45 guests