Custom Forged pistons in NZ

Post whatever you like in here but try to keep it Honda City related!
Mark_Moddy
Forum Regular
Posts: 73
Joined: Sun Feb 01, 2004 12:53 pm
Location: Brisbane, Australia

Custom Forged pistons in NZ

Postby Mark_Moddy » Fri Jan 04, 2008 1:42 pm

Hello NZ members

Do you guys know of any custom forged piston makers in NZ ?

Thanks

Mark

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Sat Jan 05, 2008 6:26 am

Nope, Dont even bother. Get them made by venoila in the states, $400USD and you have yourself a set.

Mark_Moddy
Forum Regular
Posts: 73
Joined: Sun Feb 01, 2004 12:53 pm
Location: Brisbane, Australia

CP pistons in Brisbane

Postby Mark_Moddy » Sat Jan 05, 2008 6:31 am

Thanks for the post.

CP Pistons in Brisbane can do them via the States, but they are expensive and it'll take 6 weeks. Specialised pistons in Melbourne are even more expensive and it'd take months.

Please email me the link for your contact in the states.

Thanks

MM

User avatar
ProT
Donating Member
Posts: 203
Joined: Mon Mar 29, 2004 7:40 pm
Location: Sydney

Postby ProT » Sat Jan 05, 2008 8:12 am

Looking on the net I found

http://www.venolia.com/

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Tue Jan 08, 2008 5:33 am

Thats the guys, have a look on http://www.1stgencivic.com forums, some people on there have had some made for 1st gen civic motors.

QikLude
Forum Addict
Posts: 669
Joined: Thu Nov 14, 2002 7:25 pm
Location: Nelson, NEW ZEALAND
Contact:

Postby QikLude » Mon Jan 21, 2008 5:32 pm

Try proturn engineering in Chch

They will custom make some for you, or more to the point use some blanks and make them into what u need.

I used them for some customer pistons for my other honda.

Cheers

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Mon Jan 21, 2008 5:57 pm

Hey man good to see your still kicking about. Isn't your 'lude h22a? If so why did you go for custom pistons when there is plenty of off the shelf?

QikLude
Forum Addict
Posts: 669
Joined: Thu Nov 14, 2002 7:25 pm
Location: Nelson, NEW ZEALAND
Contact:

Postby QikLude » Tue Jan 22, 2008 7:31 pm

bigelboe wrote:Hey man good to see your still kicking about. Isn't your 'lude h22a? If so why did you go for custom pistons when there is plenty of off the shelf?


yo!

yeah im still around, my city project is still rolling along slowly :roll:

also, heres the address for proturn


http://www.localmoa.co.nz/misc/proturn-engineering-nz-ltd-87346


Return to “General”

Who is online

Users browsing this forum: No registered users and 61 guests