WA Honda meet up n cruise on 21/4 sat morning

Post whatever you like in here but try to keep it Honda City related!
connorling
Forum Regular
Posts: 99
Joined: Mon Jul 05, 2010 6:28 pm
Contact:

WA Honda meet up n cruise on 21/4 sat morning

Postby connorling » Fri Aug 27, 2010 2:26 am

hey, i got my car out on the street again. anyone from Perth wanna meet up and check out each other city?
Last edited by connorling on Thu Apr 05, 2012 9:10 am, edited 1 time in total.

connorling
Forum Regular
Posts: 99
Joined: Mon Jul 05, 2010 6:28 pm
Contact:

Postby connorling » Sat Sep 04, 2010 10:07 pm

anyone??? post interest please

craybait
Donating Member
Posts: 120
Joined: Sat Feb 28, 2009 5:24 pm
Location: perth western australia

perth run

Postby craybait » Sat Sep 04, 2010 11:31 pm

should be a starter in next 2 weeks[slight car problem at present]

ANTHRAXXX
Forum Addict
Posts: 659
Joined: Wed Mar 11, 2009 11:04 am
Location: Perth WA

Postby ANTHRAXXX » Tue Sep 07, 2010 10:07 am

I'd be keen also but typically my car has shat itself :shock: drove it around the bloke & it spat out a big cloud of smoke..did another oil change and pulled out another frag. of metal..probably blown a cylinder or something. :?

ANTHRAXXX
Forum Addict
Posts: 659
Joined: Wed Mar 11, 2009 11:04 am
Location: Perth WA

Postby ANTHRAXXX » Tue Sep 07, 2010 2:13 pm

I reckon I've blown a ring :shock: metal bits look kinda ring-ish...car puffs out smoke when u rev it high etc..and it's always had that erratic pulsing-idle thing going on...she's going into the mechanic's on Friday..

connorling
Forum Regular
Posts: 99
Joined: Mon Jul 05, 2010 6:28 pm
Contact:

Postby connorling » Wed Sep 08, 2010 1:31 am

is the revv pulsing = revv hunting???

i have that problem sometimes.

also some blue smoke when i start the engine in cold. but stop after like 5 sec.

dont know whats wrong with the car.

this engine is kind of weak.....

where can we rebuild it?

ClassicProT
Forum Regular
Posts: 90
Joined: Tue May 12, 2009 11:45 pm

Postby ClassicProT » Wed Sep 08, 2010 10:01 am

If you haven't done so already, you should get a compression test done on the engine. This way you can see if the engine is somewhat running in optimum conditions with no leaks.


If the compression is fine, then you might want to look into the turbocharger. The seals/shaft might be leaking oil.

ANTHRAXXX
Forum Addict
Posts: 659
Joined: Wed Mar 11, 2009 11:04 am
Location: Perth WA

Postby ANTHRAXXX » Wed Sep 08, 2010 12:34 pm

I’m taking mine to Ultra Tune here in Joondalup, as it’s close to work & guy there sounds keen to check it out unlike afew other places around here I’ve been to before. See how it goes. Mines had the pulsing idle since I got it running & from what I’ve read about blown engine rings etc. it can be related to that so am keen to see what they can findout.

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Mon Sep 20, 2010 6:26 pm

Most likely the valve stem seals from what you describe, when the engine is sitting they leak oil into the the ports that you burn when it starts up. Unfortunately they are a bit of a pain to change because you have to pull every valve spring, Id probably just put up with it personally.

Caleb
Donating Member
Posts: 115
Joined: Wed Sep 20, 2006 4:24 pm
Location: Perth,Western Australia
Contact:

Postby Caleb » Sat Oct 02, 2010 2:35 pm

ok lets see if we can get the ball rolling here!!!

Who's free next Saturday the 9th around 1ish & can get themselves preferably in there city's to Balga for a bit of a chit-chat & maybe some troubleshooting :twisted:

connorling
Forum Regular
Posts: 99
Joined: Mon Jul 05, 2010 6:28 pm
Contact:

Postby connorling » Sat Oct 02, 2010 7:38 pm

how about now??? i am doing nothing atm....

the radiator hose crack last night, all the fluid came out, it was running hot, then it starts revving high, at the end i got home, i changed the hose today, see how it goes.

ANTHRAXXX
Forum Addict
Posts: 659
Joined: Wed Mar 11, 2009 11:04 am
Location: Perth WA

Postby ANTHRAXXX » Sat Oct 02, 2010 7:45 pm

Haha I think Conor's head will xplode if we dont all meet soon. 9th suits me, but Balga? Conor suggested meeting at Ikea once?

connorling
Forum Regular
Posts: 99
Joined: Mon Jul 05, 2010 6:28 pm
Contact:

Postby connorling » Sat Oct 02, 2010 7:53 pm

who suggested Balga? someone just got kill there when they get out of the car, i always hate Balga, shit hole, its like a nuclear waste land. sorry for the decent people who live there.

Ikea is good, near my hse :)

or if not many cars, can do it at the end of Civic street/court/something, next to the city of stirling, no hse there and bit area to chill out.

ANTHRAXXX
Forum Addict
Posts: 659
Joined: Wed Mar 11, 2009 11:04 am
Location: Perth WA

Postby ANTHRAXXX » Sun Oct 03, 2010 1:35 pm

Soo next Saturday..Actually Ikea on a saturday is a nightmare, half of Perth goes there to eat the meatballs ( god knows why ) and buy shiny new Kloogs or Durts to take home & assemble...How about the park near the Stirling train station on Cedric st? It's a nice area, nice park, good place for pics. etc.. ?

connorling
Forum Regular
Posts: 99
Joined: Mon Jul 05, 2010 6:28 pm
Contact:

Postby connorling » Sun Oct 03, 2010 5:41 pm

i guess it would just be me and u. lol,

that park is good, also the end of civic court.


Return to “General”

Who is online

Users browsing this forum: No registered users and 90 guests