Who has got a low city??

[paddymarsh]

Just wondering who has got a lowered city? How low? How did you do it? Got any pics? I am just researching. I either want to go to less than 100mm or just leave it stock.

Cheers

[James]

There are lowering springs on Yahoo Japan otherwise you are doing something custom.

[bmgjet]

Lowing springs wont get it under 100mm, wont even get it close to that unless you have 4 people in the car.

[paddymarsh]

Yeah i was thinking more down the custom made coilovers sort of line

[Drifter995]

pre-sure james was developing some coils, otherwise somebody else had a few sets of coilovers I think.

[paddymarsh]

I would definitely be keen to buy some coilovers if anyone has a set lying around

[James]

Depends how much you want to spend as to what you can do.

This is a good guide to doing a decent job on the cheap:

http://oldschool.co.nz/phpbb/viewtopic.php?f=48&t=26443

Its not Honda-specific, so you will have to find some different inserts that work.

[Drifter995]

Depends how much you want to spend as to what you can do.

This is a good guide to doing a decent job on the cheap:

http://oldschool.co.nz/phpbb/viewtopic.php?f=48&t=26443

Its not Honda-specific, so you will have to find some different inserts that work.

I don't really think that makes good adjustable ones... It gives you an option to get more lows, yes... but in doing that, you would ruin your spring pre-load. Amirite?

[James]

You get shorter shocks so you can go lower and keeps your springs captive. Spring pre-load isn't very important. You can safely run with zero pre-load.

[Drifter995]

You get shorter shocks so you can go lower and keeps your springs captive. Spring pre-load isn't very important. You can safely run with zero pre-load.

Ah, the more you know. Thanks for clarifying