Shocks and springs
Posted: Tue Jun 25, 2013 9:37 am
Hi all,
After a looooooong absence, I'm back and getting work done on my beast T2. Currently looking at shocks and want to know if anyone has fitted anything radical to their Citys? My mechanic has proposed upside down Bilsteins inside a custom coil-over. Probably gonna cost about $1,000 per corner ($800 per shock, plus fabrication) I know the N1 racers had Bilsteins, but don't know the model. Adapting some racing 175lb springs, which should be ok. Rear setup shouldn't be too much of a problem as there's more room to play with.
After a looooooong absence, I'm back and getting work done on my beast T2. Currently looking at shocks and want to know if anyone has fitted anything radical to their Citys? My mechanic has proposed upside down Bilsteins inside a custom coil-over. Probably gonna cost about $1,000 per corner ($800 per shock, plus fabrication) I know the N1 racers had Bilsteins, but don't know the model. Adapting some racing 175lb springs, which should be ok. Rear setup shouldn't be too much of a problem as there's more room to play with.