Page 1 of 1

Crank pulley tool or bot removal tips?

Posted: Sat Mar 11, 2017 8:49 pm
by The N/A Way
Hi All,
Having trouble removing the crank bolt to replace the worn timing belt.

I have a couple honda pulley tools and rattle guns but Im finding the aircon pulley is preventing me from using the pully tools and the air con pulley only has a round inside and two little shallow holes.

Does anybody have any tips or know the right tool?

Re: Crank pulley tool or bot removal tips?

Posted: Sun Mar 12, 2017 7:45 pm
by DDmitry

Re: Crank pulley tool or bot removal tips?

Posted: Mon Mar 13, 2017 10:02 am
by The N/A Way
I usually do bet the E-series spins the opposite way

Re: Crank pulley tool or bot removal tips?

Posted: Mon Mar 13, 2017 1:20 pm
by DDmitry
I took this way at my T2...

Re: Crank pulley tool or bot removal tips?

Posted: Sun Mar 19, 2017 6:31 pm
by The N/A Way
Ended up using an 8mm D shackle squeezed through one of the holes connected to a chain wrapped around the front crossmember/brace. (2 D's and 1m chain for $11 @Bunnings) and that held like a dream so I could crack it with the breaker.