wheels

[hazchem]

ok so I have a Honda city pro t 1984 I want to change the wheels and tires to 13" what are available to me as a standard rim not a mag?

[Turbo3]

HI there hazchem,
So why do you want to stick with heavy pressed steel rims? And only 13"? I've seen 17s on a Pro-T which did look a bit odd, but 14-15 is all good!! ;D
I'd watch out for some 2nd hand mag 14s if budget is a worry. So are you in NZ or Aus?
Cheers,
Pete

[Michael]

My mate put standard 14inch lancer wheels on his city and gave it that cop wheel look. Basically most 4x100 wheels will fit - just try them and see.  

[city_boy_t1]

If you get 14s just bee carefull as to what profile tires you decide to go for as i was running 185/60/14 on my T1 with standard suspension and found that you could not any passengers as it would rub severely.  I have tried rolling the guards myself but didnt have much luck and in the end i got sooo fed up with the car (cause i couldnt find any stiffer springs and shocks) that i just simply opted for a T2 and now i run those same mags and tires and have absolutely no problems.

cheers

BOB

[ct]

Hi Pro-T,
            Most wreakers will sell you tires fairly cheaply. I would suggest letting your fingers do the walking and ringing some of your local wreakers and asking them if they have any that will suit at a reasonable price. I got some tires that looked almost brand new for $25 each from a wreakers in Adelaide for my old car.

Good Luck
Cheers
Chris

[doggystyle]

if anyones looking for wheels in chch go to affordble tyres on mowbray st behind jade stadium they have heaps and really cheap tyres too.. i used to get my 265/35/18s for $120 each with about 6mm tread, new they were worth $500 they've got mags comin out their ears(second hand)