Honda spares unhelpfull
-
- Forum Enthusiast
- Posts: 261
- Joined: Wed Mar 26, 2003 1:34 am
- Location: Brisbane
Honda spares unhelpfull
>:(They have got to be the most unhelpfull people I've dealt with.
I went in a couple of months back to get prices for my control arm / ball joint and it was seemingly a simple task >:( but then yesterday I went in to order a Vac advance.. they needed my engine number chassis number had to fax melbourne, and basically said that they don't want anything to do with me because I had an import Honda CIty T2..
No wreckers have vac advances here, although they assume it'll be the same as a City Pro unit but won't separate them from the dizzy.. bummers
Just thought I'd vent here..
later
Andy
I went in a couple of months back to get prices for my control arm / ball joint and it was seemingly a simple task >:( but then yesterday I went in to order a Vac advance.. they needed my engine number chassis number had to fax melbourne, and basically said that they don't want anything to do with me because I had an import Honda CIty T2..
No wreckers have vac advances here, although they assume it'll be the same as a City Pro unit but won't separate them from the dizzy.. bummers
Just thought I'd vent here..
later
Andy
Re: Honda spares unhelpfull
Strong for Honda may do international shipping if you ask nicely (I assume oyu are in Oz?) They are very easy to deal with and always have City Turbo parts available....
Re: Honda spares unhelpfull
I'm after a new vac advance too. Yep, we're in aus, both in brisbane. How much are the vac advance from Strong for Honda?
Re: Honda spares unhelpfull
If you want to have any success with getting T11 parts from local honda dealers you need to first look up the part number in the info database then ask for it by part number. The dealers don't have any of this information so will show very little interest. The part number for the Vac advance canister is "30104PD1912 control vacuum" I bought one over the phone from Westmore Car Centre, Parts and Service: 24 Sylvan Road, Toowong . Qld. The parts man knew exactly what I wanted and sourced it from the Honda Australia warehouse. Cost me $189.95 plus gst Phone (07)3000 2500 I got some ccvc valve stem seals at the same time. It is not the same as the Pro T.
Re: Honda spares unhelpfull
It would be cheaper to get a used one shipped over from here, but i dont know if they will honour the guarantee if the part has left the country...
-
- Forum Enthusiast
- Posts: 261
- Joined: Wed Mar 26, 2003 1:34 am
- Location: Brisbane
Re: Honda spares unhelpfull
got an email address or phone number for strong for Honda in NZ??? might send them a message see what I can do!!
THanks
Andy
THanks
Andy
-
- Forum Regular
- Posts: 90
- Joined: Fri Aug 16, 2002 10:53 am
- Location: Mount Maunganui, New Zealand
- Contact:
Re: Honda spares unhelpfull
Hi Andy
Take a look here http://www.stronghonda.co.nz. I sorted a new vacuum advance for someone in Oz and just posted it over there. The last one I brought was about $160NZD, they were much cheaper about 18months ago but for some reason Honda decided to more than double the price.
Cheers
Tony :D
Take a look here http://www.stronghonda.co.nz. I sorted a new vacuum advance for someone in Oz and just posted it over there. The last one I brought was about $160NZD, they were much cheaper about 18months ago but for some reason Honda decided to more than double the price.
Cheers
Tony :D
Re: Honda spares unhelpfull
That was me that Tony shipped it over to. Got here promptly and cost less than buying it here. PS. The non-turbo one has only one housing and is not the same as the turbo one. Good luck. Joel
-
- Forum Addict
- Posts: 589
- Joined: Tue Jan 07, 2003 9:57 pm
- Location: Manly West, Brisbane, Queensland
Re: Honda spares unhelpfull
I got mine ordered brand new through
the Honda spares behind the RE off Coronation Drive
Brisbane.
Ten days from japan $200 and something.
Got the part number and all that if you want it!
the Honda spares behind the RE off Coronation Drive
Brisbane.
Ten days from japan $200 and something.
Got the part number and all that if you want it!
Re: Honda spares unhelpfull
That is impressive, they have gone up in price heaps!!! Mine was only $75 or something when i got it. Been replaced twice on guarantee since then though...
-
- Forum Enthusiast
- Posts: 261
- Joined: Wed Mar 26, 2003 1:34 am
- Location: Brisbane
Re: Honda spares unhelpfull
Emailed Strong For Honda they're out of 2nd handers.. but suggested I try Honda NZ... no luck finding an email address there for spare parts.. might try Strong again to see if they can order me a new one.. I've asked Honda but they've not gotten back to me yet..
Smithy I'd love the number if that's cool.. just PM or email it to me thanks
Andy
Smithy I'd love the number if that's cool.. just PM or email it to me thanks
Andy
-
- Forum Enthusiast
- Posts: 261
- Joined: Wed Mar 26, 2003 1:34 am
- Location: Brisbane
Re: Honda spares unhelpfull
Right good news.. >:( The vac advance part has been discontinued. The fella reackons he can't even get one from Honda Japan... but will put in some application anyway to see if they can get one from elsewhere (where that'll be I have no idea and I don't think he has any clue either). Ok well I think I might have to get onto Honda NZ and see if they've got one in the warehouse.
Ok I might look into the possibility of making one.. Right so how do these things work again.?
Andy
Ok I might look into the possibility of making one.. Right so how do these things work again.?
Andy
Re: Honda spares unhelpfull
If you get desperate you can get them reconditioned, though i am not sure how much that will cost. It will be easy enough to find a buggered one (if you dont have one already). I think making one is probably a little optimistic, but i dont know what sort of equipment you have lying around...
Re: Honda spares unhelpfull
Is the vacuum advance that lil tin thingy attached to the dizzy? If so I have a spare dizzy that has that still attached to it. I have no use for it cuz I am using Microtech that handles my timing.
-
- Forum Enthusiast
- Posts: 261
- Joined: Wed Mar 26, 2003 1:34 am
- Location: Brisbane
Re: Honda spares unhelpfull
really?? ok then where are you I might see if we can get it sent but can you first check if it works.. ie suck on the hose see if it stops after a little bit of sucking?? no point in sending a shagged one.. already got two of those!! haha!! And Yes it is that Canister on the side of the dizzy.. should have two hose connections on it. Email me we can work something out.
THanks
Andy
oudyn AT uqconnect.net
THanks
Andy
oudyn AT uqconnect.net
Who is online
Users browsing this forum: No registered users and 118 guests