KingCity

Post pictures and details of your Honda City
KingCity
Forum Enthusiast
Posts: 246
Joined: Wed Aug 18, 2010 9:08 pm
Location: Waipukurau, New Zealand

Re: Twin Pot Calipers?

Postby KingCity » Fri Jul 31, 2015 4:57 pm

Thanks. Umm so I've heard & read there was a special 80's Prelude or Accord that came out with twin pot calipers, I thought there was one down at the wreckers here but no I lucked out there. As for 4 pot calipers well if Honda have used them they are likely to only be on the NSX or much newer cars, unfortunately i am not up with the play on brake units that Honda use.

KingCity
Forum Enthusiast
Posts: 246
Joined: Wed Aug 18, 2010 9:08 pm
Location: Waipukurau, New Zealand

Need To Move These

Postby KingCity » Sat Nov 21, 2015 7:22 pm

Ummm..... So i had to move into a new house the other day but had these 3 Motors that needed moving...................

Image

How to sack the rear of a City.........................Put 3 motors in it!

Image

Image

KingCity
Forum Enthusiast
Posts: 246
Joined: Wed Aug 18, 2010 9:08 pm
Location: Waipukurau, New Zealand

Drag Update With The NOS

Postby KingCity » Sat Nov 21, 2015 7:47 pm

I was also at the Honda Drag meet a couple weekends ago to finely try it with the nitrous but didn't even get close to my PB time. I was running a T1 turbo on the T2 manifolds which seems to hold its 11psi boost better with hardly any creep & a 30hp shot of nitrous but only ran a best of 14.8 at 94.1mph (151kph) which isn't great but still not to bad considering I'm well down on power using the nitrous compared to running 20psi of boost or more so it was a good test.

Unfortunately they were only writing out the times on paper without doing a full printout so i had no idea what my 60 foot times were to give a comparison with my other times. The car seemed fairly good off the mark with more than enough traction but i had a lot of axle tramping problems trying to warm the tires.

NAC Car Culture were there filming & i was lucky enough to get in front of the camera as i was the odd ball Honda there so they thought that was a good enough reason so there's a good chance you may see some footage of the car running. When they were filming i had only managed a 15.1 at that stage & i really thought i would have been doing low 14's easy, when am i going to give up on trying to get a 13 :lol:

ANTHRAXXX
Forum Addict
Posts: 659
Joined: Wed Mar 11, 2009 11:04 am
Location: Perth WA

B Swapped City

Postby ANTHRAXXX » Fri May 06, 2016 3:23 pm

Hey Kingcity, I found the owner of that Jazz/B18 engine car on Facebook - Rolands Ozoliņš

User avatar
themidnightgarage
Forum Participant
Posts: 16
Joined: Mon May 09, 2016 2:05 am
Contact:

B Swap It

Postby themidnightgarage » Sat May 21, 2016 8:13 pm

put that b swap in it! lol

KingCity
Forum Enthusiast
Posts: 246
Joined: Wed Aug 18, 2010 9:08 pm
Location: Waipukurau, New Zealand

Re: B Swap It

Postby KingCity » Sat May 21, 2016 10:28 pm

All motivation has gone unfortunately. The GA2 City is only 100kgs heavier than the AA city so by the time i put the B18C in the AA City its probably only likely to be around 50-60kgs lighter than the GA City so there's going to be bugger all performance differences between them so i might as well just stick to the GA2 City.

User avatar
themidnightgarage
Forum Participant
Posts: 16
Joined: Mon May 09, 2016 2:05 am
Contact:

Re: B Swap It

Postby themidnightgarage » Thu May 26, 2016 8:13 pm

makes sense!

KingCity
Forum Enthusiast
Posts: 246
Joined: Wed Aug 18, 2010 9:08 pm
Location: Waipukurau, New Zealand

B18c Fits In The City!

Postby KingCity » Sat Feb 04, 2017 9:40 pm

Hmmmm.........Interesting

Image

Image

Image

Image

Image

User avatar
spike10000
Forum Enthusiast
Posts: 137
Joined: Wed Aug 08, 2007 3:21 pm
Location: NSW

Re: B18c Fits In The City!

Postby spike10000 » Mon Feb 06, 2017 8:22 am

Damn tight fit!!

KingCity
Forum Enthusiast
Posts: 246
Joined: Wed Aug 18, 2010 9:08 pm
Location: Waipukurau, New Zealand

Re: B18c Fits In The City!

Postby KingCity » Mon Feb 06, 2017 5:28 pm

Very!
There's a lot of work needed to make it work but it is do-able, i just had to see it for myself while i had the motor out repairing the turbo.

ANTHRAXXX
Forum Addict
Posts: 659
Joined: Wed Mar 11, 2009 11:04 am
Location: Perth WA

Re: B18c Fits In The City!

Postby ANTHRAXXX » Thu Feb 09, 2017 1:22 pm

I stuck your pictures on my FB page, nearly 3000 views..maybe should complete the job just for the sake of being popular? Meanwhile a guy in Malaysia posted a pic of this City with a Daihatsu K3 unit in it

https://www.facebook.com/14864622515662 ... =3&theater

User avatar
spike10000
Forum Enthusiast
Posts: 137
Joined: Wed Aug 08, 2007 3:21 pm
Location: NSW

Adjustable Suspension?

Postby spike10000 » Tue Jun 06, 2017 1:38 pm

King, I was reading in a separate search that you had some custom adjustable suspension done for your city by Cobra? Any details you can share would be appreciated :D

KingCity
Forum Enthusiast
Posts: 246
Joined: Wed Aug 18, 2010 9:08 pm
Location: Waipukurau, New Zealand

Re: Adjustable Suspension?

Postby KingCity » Tue Jun 06, 2017 3:46 pm

Hello Spike. I had some KYZ shocks from SpeedFactor in Tauranga which they made up some threaded steel bars that fitted into the standard City knuckles but i sold them to Turdbo a while back. The Cobra side of things was to get springs made up for the standard City shocks.

KingCity
Forum Enthusiast
Posts: 246
Joined: Wed Aug 18, 2010 9:08 pm
Location: Waipukurau, New Zealand

Bye Bye To The Last City

Postby KingCity » Sat Sep 16, 2017 7:58 pm

I have just sold my last remaining City, i now do not have a City or any City parts for the first time in 10 years.
Thank you to everyone who has helped me & shown interest in my page & modifying the City's whether good or bad but this is very much the end of the road for me & my toying with City's but i am sure to pop by this site now & again to offer any help or assistance with your builds or repairs, thanks guys.

Last photos

Image

Image


Return to “Member Cars”

Who is online

Users browsing this forum: No registered users and 38 guests