Rodeo turbo upgrade issues
-
- Forum Participant
- Posts: 11
- Joined: Mon Mar 21, 2016 4:46 am
Rodeo turbo upgrade issues
I have a t1 with the rodeo turbo installed, and lumpy cams. rest of the car is stock. as cool as it is I have lots of lag and the engine lugs hard whenever I boost into 5th gear. Top speed in 4th gear is 140kmh and can't go further as 5th gear drops me down to 100kmh and won't achieve boost. Anyone found this issue or how to resolve it?
-
- Forum Enthusiast
- Posts: 246
- Joined: Wed Aug 18, 2010 9:08 pm
- Location: Waipukurau, New Zealand
Re: Rodeo turbo upgrade issues
If you have a boost guage then keep an eye on that to see what it is doing, what PSI at what RPM & holding steady throughout rpm range while using full acceleration, sounds like a fuel or timing issue but i have been wrong before regarding a similar issue.
-
- Donating Member
- Posts: 115
- Joined: Wed Sep 20, 2006 4:24 pm
- Location: Perth,Western Australia
- Contact:
Re: Rodeo turbo upgrade issues
easy fix.. the Rodeo is a diesel & it's wastegate actuator opens around 6psi (i think) & the city lives for boost (cant remember but i think it opens around 12-14psi). you need to use the old wastegate actuator or buy a universal one.
or evil suggestion, cut the small hose between turbo & actuator & plug both ends. this method ensures immediate results
or evil suggestion, cut the small hose between turbo & actuator & plug both ends. this method ensures immediate results
Re: Rodeo turbo upgrade issues
I think Caleb is onto it
My old setup used to boost hard in all gears.i didn't know at the time but I used a stock actuator with a modified arm on it.
My old setup used to boost hard in all gears.i didn't know at the time but I used a stock actuator with a modified arm on it.
Who is online
Users browsing this forum: No registered users and 23 guests