Time for a rebuild!

Post whatever you like in here but try to keep it Honda City related!
User avatar
bmgjet
Donating Member
Posts: 220
Joined: Fri Dec 03, 2010 3:23 pm
Location: New Zealand New Plymouth
Contact:

Postby bmgjet » Thu Feb 17, 2011 5:16 pm

Or you could build a d13b with a d15b sohc vtec head.
I built one in my EG. Made 45WKW with around 7:1 compression.

d13b block weighted 10kgs less then the d15b.

User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Postby Mike_NZ » Sun Feb 20, 2011 1:13 pm

More work:

Wheel arch pre and post sealing. Got one coat of brush on underseal on, then I ran out, so second coat was spray on.
Image
Image

Engine bay.
Image

Sills, that edge looks more wobbly in this image than it does in real life.
Image

User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Postby Mike_NZ » Sun Feb 27, 2011 1:13 pm

Over this weekend I've put the steering and suspension back in, and test hung all the panels.

Image

I'll probably put the wheels on on Tuesday, then I can roll it outside and get a better look at it.

This is also about as far as it's going to progress for the next while. I'm going overseas to do some travelling for two or three years, so she's going to be packed up and put into storage very shortly.

What this means is that I now have a whole lot of parts for sale, I've gone through and sorted out the bits I'm planning to use, the rest is going to be sold, given away, or chucked in the rubbish. I'll put a post in sale/wanted with a list of all the parts.

User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Re: Time for a rebuild!

Postby Mike_NZ » Thu Mar 23, 2017 7:38 pm

Hi Guys, it's been a while, but it's good to see so many of you seem to still be here.

I'm back in NZ now, but unfortunately have bought a house that doesn't have any space to work on the car. The house is a bit of a project anyway, and so it is with much regret that I think it's time to part with my wee City.

She's been in a sealed shipping container on a farm for the past 6 years and seems to be in excellent condition. I haven’t kept the engine or gearbox as my plan was to install a D16, and the seats had to go because of the rollcage, and there's no carpet or roof lining... but I’m pretty sure all the other original parts are there. All the loose nuts and bolts are even in little labelled plastic bags.

The registration is still current, but has been on hold since I started this whole process about 10 years ago. The roll cage was built by Craig Howser in Hamilton and homologated with Mortorsport NZ.

This would be an awesome project car to pick up, and I’d love for someone from within this community to keep it going.

Image

Here it is out of the container. The brown stains near the bottom of the door are from the fish oil I sprayed into all the rust prone voids when I put it into storage. They rub off.

Image

Other side

Image

Interior with stuff.

Image

More stuff.

Image

These seats aren't fancy and don't make any claims about being certified for motorsport, but they are what the new mounting points are based on.

Image

Lots of the bits have been wrapped in plastic too.

Image

Still shiny.

So here it is. Have a read back through this thread to see the history of this build process up to this stage. If you think you might be interested in continuing this project let me know. I think I spent about 5K on the cage and rust repairs, but I'm not expecting to recoup very much of that.

I'll put it up in the for sale section too, and if no one wants it I guess it's Trademe.

User avatar
blitza
Forum Regular
Posts: 69
Joined: Fri Dec 06, 2013 12:39 pm
Location: Pukekohe, Auckland
Contact:

Re: Time for a rebuild!

Postby blitza » Thu Apr 20, 2017 7:09 pm

OooooooooooooooooooooooooooH!! checks bank

User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Re: Time for a rebuild!

Postby Mike_NZ » Thu Apr 20, 2017 7:52 pm

It's more important to me that that this gets picked up by someone who cares about Citys than I get top dollar, so you might not have to look too deeply into your bank...

I'm planning to put it on Trademe this weekend if no one here wants it.

User avatar
blitza
Forum Regular
Posts: 69
Joined: Fri Dec 06, 2013 12:39 pm
Location: Pukekohe, Auckland
Contact:

Re: Time for a rebuild!

Postby blitza » Sun Apr 23, 2017 7:29 pm

so much want! so little time............

User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Re: Time for a rebuild!

Postby Mike_NZ » Mon Apr 24, 2017 7:46 pm


User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Re: Time for a rebuild!

Postby James » Tue Apr 25, 2017 1:55 pm

$1res, brave man. Its the only way to really find the true value tho.

User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Re: Time for a rebuild!

Postby Mike_NZ » Tue Apr 25, 2017 1:57 pm

There's 33 watchers already and it's been less than 24 hours, I'm pretty happy with that.

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Re: Time for a rebuild!

Postby James » Wed May 10, 2017 6:32 pm

Thats a decent price for a rolling body you got, hope the new owner makes them-self known on here :)

User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Re: Time for a rebuild!

Postby Mike_NZ » Wed May 10, 2017 7:33 pm

They seem pretty enthusiastic, already have an n/a city that's got a bit too much rust in it. I'll steer them this way.

tofucity
Forum Participant
Posts: 11
Joined: Sun Feb 25, 2018 8:04 pm
Location: New Zealand

Re: Time for a rebuild!

Postby tofucity » Wed Sep 19, 2018 1:54 pm

How much did this sell for?


Return to “General”

Who is online

Users browsing this forum: No registered users and 21 guests