Compression Check-T11

Every bit of information we have about the Honda City compiled by our members!
Henry
Moderator / Donating Member
Posts: 422
Joined: Sat Apr 20, 2002 10:30 pm
Location: Adelaide

Compression Check-T11

Postby Henry » Mon Jul 26, 2004 10:32 pm

The compression on T11 (and T1) should be 9.5kg/cm2 (that's 135psi) at 300rpm (starter speed) with throttle wide open. If you get below these figures, squirt a small amount of oil into the spark-plug hole and re-test. The oil will seal the rings so if your numbers increase, your rings are the problem. If the numbers don't change then your valves are the problem.

Return to “The Honda City InfoBase”

Who is online

Users browsing this forum: Bing [Bot] and 0 guests