CityTurbo.com

That white tube stuff is all PVC piping.  It is cheap (cost me about $10 and half an hour) and it held 15psi no problems.  Although this was only ment to be on there until I fitted the intercooler.  It runs from the turbo straight into the GasReaserch throttle body/mixer (carby).   The piece coming ...

The things you do when your bored! I recently pulled the lpg stuff off and sold it to a mate whose making a lpg turbo Renault Fuego!  the car ran very well.  Much smoother and faster than the t2 civic I got now.  It ran 15psi without any issues and no intercooler.  I was going to put a liberty water...

I got a picture of the engine bay of my civic but don't know how to but it on the site.  The problem is it's on a Kodak CD!  Any ideas?

I also like tony's idea.  I've seen a setup like that on a 'GEMINI' (shitbox) and it sounds awsome.  Nothing sounds better than quad throttles!

Sounds like a mad project.  If your going to use twin carbys I wouldn't go for webbers or similar, there too big (really small valves).  Maybe try the ones on the other Honda's.  How about buying another manifold porting it and making an adaptor for a single 32/36 webber.  I've seen it on a civic wi...

Anti lag is seriously not good for your turbo.

Yeh I know now I got ripped off but I learnt a valuable lesson along the way.  DON'T GO TO TURBO TURQUE.  They have retards working for them.  the guy fitted the actuator rod on the wrong side of the wastegate lever.  I wasn't going to mention that but all this talk brought back the memories.  If yo...

Sounds like the FCD.  I've got one on mine and it cut out on me a couple of times.  Well thats what I was assuming.  I had a Honda Jazz pass me on the highway with the some problem!

I have to admit it was more than I thought it was going to be.  What did they do to the exhaust housing of yours?  They also fitted a new actuator which needed some custom work.  The compressor housing had to machined out to fit the new wheel.  I think that was most of the money.  i had an issue wit...

Fanx heaps mate.  You have no idea how much time you've saved me.

I know someone in Kenmore who is a mobile brake mechanic.  He done some work for me and I trust him with my car.  This is his home number:

Neil - 38784989

It is a HKS FCD and its sitting on top of the computer.  The problem is I didn't do the work so I don't know what wire is which.  What is that adjustment screw on top of the FCD? I'm not familiar with ecu's etc. and without the wiring info I'm stuck.  I prefer to do all the work myself (lost faith i...

For my T2 gen1civic I got a T1 Turbo highflowed.  That means that they put the largest possible compressor wheel in the housing.  Although i I haven't fitted it yet I'm sure its the best turbo for a street car.  In theary it should spool up faster (it's already fast enough) and should take less turb...

Hi fellas,   I got a gen1 civic with a turbo 2 engine.  the car runs fine except when I get stuck in traffic the idle hunt begins.  I've tried alot of things after reading the info base and nothing has worked yet.   The computer displays the fault code for "map sensore disconnected! (maybe this...