CityTurbo.com

Damn
Thanks for that.
Same result if i remove all the tubing I guess?

Ben

Thanks for that

I have to get the head planed, Im going to find out if they can plane it with the manifold still attached but i doubt they will do that.

Thanks
Ben

Thats the one plus all the hoses attached to it

Ben

Hey

Is it at all possible to rip out the entire Emmissions Box + Tubing And have the engine still run afterwards?

It would be extremely nice to do this and get rid of all that clutter. Not sure about the cosquences though.

Cheers
Ben

Hey Just trying to get the manifold off have undone all the bottom bolts and still does not want to come off. Have noticed nuts below the injectors. Do I need to get at these nuts to get the manifold off, Do I also have to take the fuel rail + Injectors off to get the manifold off? Any Help Apprecia...

Thanks for that

Ben

How much would it cost to send a ECU From Christchurch NZ
to Brisbane Aus?

Ben

Cheers Colza "Vacum Advance" Thats excatly what I was trying to Say :P Oh by the way front seat belts do not swap over from a T1 to a T2 The Rachets do but the Buckels are different and the front catchs (where the seatbelts go into) do not swap over nicely as the T1 has a sort of bent moun...

Oh well

Have to buy one then

Cheers anyway
Ben

Hey I have one but im in Chistchurch. "Partial EL 1600 conversion *FOR SALE* Under the possibly for sale as well list is: *)**T1 computer** *)Almost complete T1 loom (missing RH side (injectors etc) and dash loom) *)T1 gearbox with ok clutch " Colza might have one thats closer to you Ben

Hey Colza

It would be nice to get my hands on that gasket kit you have seeing as Im just having to replace one at the moment.

(Engines acutally out of the T2 and I just have to get the head off.)

Im in Christchurch

Ben

Yeah sorry about that used the wrong words  :P

That little thing thats attached to the distributor and creates a vacum (the name escapes me at the moment). They seem to swap right over.

Ben

Hey

I have one but Im in Christchurch, New Zealand

Sorry I can't help futher.

Ben

Hey nice work Colza. With the turbo when mine went I swapped it with a T1 Turbo to get me going again. What I did was swap the entire turbo assembly up to the cadiltic convertor over. only slight problem was the flanges for the air to the turbo and just used a small pipe from the flange to the air i...

Hey   Why dont you have the NZ version done on a dark tint strip, along the top of the front window. I dont know if that is possible, but that would provide a dark background. And serves a dual purpose in stopping glare at the same time. Edit: Is there a rough estimate of the price yet? Ben