4x120 alloy wheels for eb3 civic t2

Buy and sell Honda City's and Parts (Honda City's only please!)
bjmacfun

4x120 alloy wheels for eb3 civic t2

Postby bjmacfun » Wed Jun 06, 2007 6:55 pm

Proving hard to find in nz, but need to try and get a set of alloys with the eb stud pattern of 4x120. any help would be greatly appreciated. 021-262-9591

User avatar
falco
Forum Regular
Posts: 60
Joined: Tue Feb 20, 2007 5:55 pm
Location: Auckland, New Zealand
Contact:

Postby falco » Wed Jun 06, 2007 10:15 pm

Yep, not easy to find. Keep your eyes open, they do show up from time to time, and not always at mad prices. I may be buying a bulk lot of EB Civic parts sometime soonish; I don't think there are any wheels in there, but if there are I'll let you know.

f.

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Thu Jun 07, 2007 8:40 am

Colza on here might have some would only be 13" tho

sikboy
Forum Participant
Posts: 19
Joined: Mon Dec 06, 2004 3:36 pm
Location: sydney australia

15s

Postby sikboy » Fri Jun 15, 2007 10:13 am

I've got 2 sets of 15's 4 my eb I got them drilled

bjmacfun

Postby bjmacfun » Fri Jun 15, 2007 11:41 am

hey sikboy, got any pics? how much did it cost??

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Fri Jun 15, 2007 9:30 pm

Drilling is sweet you just have to find mags with the right style of hub.

sikboy
Forum Participant
Posts: 19
Joined: Mon Dec 06, 2004 3:36 pm
Location: sydney australia

15s

Postby sikboy » Sun Jun 17, 2007 11:06 am

you can get a set 15's for a city [with 4 holes only][NOT mutistud] and get them drilled.[so that there is 8 holes] that way you can put turbo city disc's on front [if you have them] [plus you only have to get 2 wheels drilled for the back] about $50 a hole or
you can get blank wheels from japan and get them drilled for your eb
upgrade the booster

go hard or go home
in a t2/civic
Last edited by sikboy on Sun Jun 17, 2007 10:39 pm, edited 1 time in total.

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Sun Jun 17, 2007 11:52 am

sikboy wrote:you can get the 15's off a city [with 4 holes only] and get them drilled. that way you can put turbo city disc's on front and civic drum's at the back [plus you only have to get 2 wheels drilled about $50 a hole] or
you can get wheels with no holes from o.s and get them drilled for eb
civic disc's that you can on prelube disc's with 200sx twin pot stopper's
upgrade the booster and you got one eb civic that can go hard and still stop

go hard or go home
in a t2/civic


Dude seriously, can you edit that post I cant understand f*ck all of what you are trying to say.

sikboy
Forum Participant
Posts: 19
Joined: Mon Dec 06, 2004 3:36 pm
Location: sydney australia

eb

Postby sikboy » Sun Jun 17, 2007 10:29 pm

all in all you can get 15's to fit a eb civic

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Sun Jun 17, 2007 10:43 pm

You sure can. best way IMHO would be to import some wagon knuckles from the states or maybe from aussie. I have only ever seen 1 1st gen wagon here.

With wagon knuckles you just press in EN1 4x100 hubs and then your choices for mags become practically endless (and cheap).

If you get the hubs pressed out of the knuckles before they are shipped it isn't tooo bad, I think the one's that colza got were about $100USD shipping + whatever you pay for wagon knuckles.

sikboy
Forum Participant
Posts: 19
Joined: Mon Dec 06, 2004 3:36 pm
Location: sydney australia

Postby sikboy » Mon Jun 18, 2007 9:00 am

Has this been in the infobase?
so if I get my wagon drum's on the back [press them to 4x100]
I can get whatever wheel's I want.
has someone else done this?

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Mon Jun 18, 2007 12:16 pm

sikboy wrote:Has this been in the infobase?
so if I get my wagon drum's on the back [press them to 4x100]
I can get whatever wheel's I want.
has someone else done this?


OK you seem a bit confused.

You get 1st gen wagon FRONT knuckles, the bit the hub sits in and the shock bolts in. You press out the old 4x120 hubs and press in (with new bearings) the hubs from an EN1 civic. These hubs are pretty much identical except for having 4x100 stud pattern.

The other benifit of having wagon knuckles on the front is you can bolt on a huge variety of brakes, 91 Si civic front brakes, 88 Si accord front brakes etc, without the need for calliper spacers or adaptors.

As for the rear you take the drum off, drive out the existing studs and drill 4 new holes at 100mm PCD, then drive the studs back through the new holes. To do it well you really need to build up a bit of weld where you drill the new holes because its on an angle so the stud doesnt sit nicely, when you take it apart you will see what the issue is.

To drill them accurately at 100mm get someone to chuck it in a lathe and scribe a 100mm dia circle on the outer face of the drum, then divide this into exactly 4 parts.

As this is a city turbo forum and not a 1st gen civic forum it isn't covered in the infobase. However if you go to w[url]ww.1stgencivic.org[/url] and search on the forums there is a lot of information regarding this swap.

bjmacfun

Postby bjmacfun » Mon Jun 18, 2007 6:18 pm

well, thanks for all that. does anyone have any 4x120 alloys for sale?


Return to “For Sale / Wanted”

Who is online

Users browsing this forum: Google [Bot] and 67 guests