hi
I have a vr4 intercooler for my t2 but no piping would anyone know where I can get pipes made up or where to buy already done intercooler with pipes
cheers
t2 intercooler + piping
-
- Forum Enthusiast
- Posts: 155
- Joined: Fri Oct 05, 2007 9:54 am
- Location: Wanganui New Zealand
-
- Forum Enthusiast
- Posts: 261
- Joined: Wed Mar 26, 2003 1:34 am
- Location: Brisbane
-
- Donating Member
- Posts: 115
- Joined: Wed Sep 20, 2006 4:24 pm
- Location: Perth,Western Australia
- Contact:
Mmmmm custard tarts .... I kno of 5 places aust wide that sell SPS air, fuel & water high performance silicone hoses that they cut to size.
in WA they sell them through Turbotech Ph: (08)9478 2144
in NSW it's Motorsport Connection Ph: (02)9838 7272
in QLD it's Aluminum Radiators Ph: (07)3205 4620
in SA it's Auto Sport Engineering Ph: (08)8299 0302
& Capital Territory it's Phillip Radiators Ph: (02)6282 3926
hope this helps
in WA they sell them through Turbotech Ph: (08)9478 2144
in NSW it's Motorsport Connection Ph: (02)9838 7272
in QLD it's Aluminum Radiators Ph: (07)3205 4620
in SA it's Auto Sport Engineering Ph: (08)8299 0302
& Capital Territory it's Phillip Radiators Ph: (02)6282 3926
hope this helps
-
- Forum Enthusiast
- Posts: 155
- Joined: Fri Oct 05, 2007 9:54 am
- Location: Wanganui New Zealand
mmmmn
I live in Wanganui NZ
I would pay for some pipes custom made but I can't find anywhere to do it
if anyone can sell pipes premade for a t2 it'd be even better, I'd pay a fair price
I would pay for some pipes custom made but I can't find anywhere to do it
if anyone can sell pipes premade for a t2 it'd be even better, I'd pay a fair price
-
- Forum Enthusiast
- Posts: 155
- Joined: Fri Oct 05, 2007 9:54 am
- Location: Wanganui New Zealand
when i got my intercooler i bought a big box of aluminium bends and straight sections plus joiners and hose clamps they called it a unerversal piping kit(makes sence) i am sorry i cant remember what the place i got it from was called but they were in the states.
have you tried ebay?
and after all that i still had to make up a custom bend that i built from 50mm stainless pipe cut at an angle and welded back together,dogey but it works.
good luck matt
have you tried ebay?
and after all that i still had to make up a custom bend that i built from 50mm stainless pipe cut at an angle and welded back together,dogey but it works.
good luck matt
Who is online
Users browsing this forum: No registered users and 56 guests