collection for sale needs a new home
Posted: Sat Sep 21, 2013 4:55 pm
Hi all, long time no post, I've had to make a hard decision to let go my collection as it has gotten a bit out of hand and i know i'll never have the money or the time for all my projects .
first off i have a licensed T2 (craybaits old one) a lot of money & time has gone into it, i believe ken has receipts for the engine being balanced, dyno tuned & turbo flowed & other things done, unfortunately the guy he sold it to destroyed the 2nd & 3rd gear syncros & has a wiring starting problem which will need more money & time that i don't have.
next is my unfinished cabrio project. I had dreams of turning this into a beast, with a racer bodykit, recond T2 engine with the new rodeo turbo i got for it, paired with the old n/a cabrio gearbox with a 4.7 final drive should beat any car off at the lights. it needed a new hood and i have it striped back to tackle rust & was going to por15 the engine bay. but again not enough time.
& some 13/60/195 mags
and back when i first swapped in the t1 engine
& lastly is my collection of parts, i have a little bit of a collecting problem every time i see an add for parts & the guy's threatening to send it to scrap if it wont sell i'm in for the rescue . I'll try list what i have
engine & box complete out of my T1 that died of cancer
T1 engine & box complete out of the cabrio, now spare superseded by the new T2 engine
T1 engine, n/a engine, T1 box, T1 radiator & some wiring looms
AC parts fuel lines & another T1 radiator
1 pare T1 seats, cobrio rear seat & 1 pare T1 seats with bodysonic & somewhere i'll have the main bodysonic hardware
old cab front seats t1 & city-e guards
3 dashboards, center console, heater blower box, more guards & the plastic inside guards
suspension, 2 steering columns, door panels, sumps, ac compressor & brackets
pic didn't upload but 4 T1 doors complete 1 city E door 2 front windscreens, 4 rear 1/4 glass, and 3 exhaust pipes (1 2.5" hotdog, 1 n/a & 1 turbo)
the T2's bumper, T1 front & back bumpers, city E front & back bumpers, 2 T1 bumpers, rear suspension, set of 12" mags, set 12" steel, 2 13" steel, 2 flywheels & a box of bits
2 T1 back seats & more boxes of bits
assorted parts, a bit of everything in there
T1 interior & exterior
a lot of new parts i was saving for the cab, crx rotors & pads for brake upgrade, new silicone vac hose, a fcd, lights, digital boost gauge,
and finally this genuine city turbo uncut key
I'd rather it all goes to a good home, i haven't been doing my bit replying to all the wanted parts adds on the forum so if there's an enthusiast on here with a bit of room & spare time that can help me out that'd be sweet I'd prefer not to advertise on gumtree.
i'm asking for $3500 the lot (will not separate)
first off i have a licensed T2 (craybaits old one) a lot of money & time has gone into it, i believe ken has receipts for the engine being balanced, dyno tuned & turbo flowed & other things done, unfortunately the guy he sold it to destroyed the 2nd & 3rd gear syncros & has a wiring starting problem which will need more money & time that i don't have.
next is my unfinished cabrio project. I had dreams of turning this into a beast, with a racer bodykit, recond T2 engine with the new rodeo turbo i got for it, paired with the old n/a cabrio gearbox with a 4.7 final drive should beat any car off at the lights. it needed a new hood and i have it striped back to tackle rust & was going to por15 the engine bay. but again not enough time.
& some 13/60/195 mags
and back when i first swapped in the t1 engine
& lastly is my collection of parts, i have a little bit of a collecting problem every time i see an add for parts & the guy's threatening to send it to scrap if it wont sell i'm in for the rescue . I'll try list what i have
engine & box complete out of my T1 that died of cancer
T1 engine & box complete out of the cabrio, now spare superseded by the new T2 engine
T1 engine, n/a engine, T1 box, T1 radiator & some wiring looms
AC parts fuel lines & another T1 radiator
1 pare T1 seats, cobrio rear seat & 1 pare T1 seats with bodysonic & somewhere i'll have the main bodysonic hardware
old cab front seats t1 & city-e guards
3 dashboards, center console, heater blower box, more guards & the plastic inside guards
suspension, 2 steering columns, door panels, sumps, ac compressor & brackets
pic didn't upload but 4 T1 doors complete 1 city E door 2 front windscreens, 4 rear 1/4 glass, and 3 exhaust pipes (1 2.5" hotdog, 1 n/a & 1 turbo)
the T2's bumper, T1 front & back bumpers, city E front & back bumpers, 2 T1 bumpers, rear suspension, set of 12" mags, set 12" steel, 2 13" steel, 2 flywheels & a box of bits
2 T1 back seats & more boxes of bits
assorted parts, a bit of everything in there
T1 interior & exterior
a lot of new parts i was saving for the cab, crx rotors & pads for brake upgrade, new silicone vac hose, a fcd, lights, digital boost gauge,
and finally this genuine city turbo uncut key
I'd rather it all goes to a good home, i haven't been doing my bit replying to all the wanted parts adds on the forum so if there's an enthusiast on here with a bit of room & spare time that can help me out that'd be sweet I'd prefer not to advertise on gumtree.
i'm asking for $3500 the lot (will not separate)