Here i have my Hi-flowed T1 Turbo for sale, i am planning on a different setup & don't plan on using it again so the sooner it goes the sooner i have to do the new setup.
I've had it for quite some years but have only recently fitted a hi quality muffler to quieten it as it use to be a striaght pipe without any mufflers. It sounds mint now & even better high in the rpm.
Setup consists of a Hi-flowed T1 turbo with a VJ6 compressor cover (which has been smoothend & polished) with a VJ20 compressor wheel & larger exhaust wheel to suit $700 (WRX comp & exhaust wheels), boost is only a few hundred rpm later so isn't that laggy for what is quite a bit larger than a standard city turbo. 38mm Tial V-band External wastegate (plumed back into exhaust) $400, comes with a 9 & 6 pound springs. Custom 2.5" mandral bend exhaust, i cannot remember the price (around $500 i think) but it cost me a further $460 for the muffler & fitment only a few months ago so yeah it adds up.
I would like a grand atleast for it but no one likes to spend a grand on a city in one hit so $800 will be my lowest price but as it is bulky & pickup is really the easiest option for me then im happy to sell only the turbo, wastegate & dump pipe seperately for $600 & i can post it to you as i will use the rest of the exhaust on the next setup. Also if you are interested in the T2 intake manifold & 50mm Turbosmart BOV then this could be added for a further $400 & comes with the T2 black box & T2 ECU, BOV cost me $400. A Blow Of Valve is needed with this turbo when running high boost otherwise you will kill that turbo within a few thousand ks as i did so it cost me a further $150 to fix it, photos of the BOV & manifold can be viewed on my main page under members cars, for most people the BOV pipe will have to be modified to fit there setup with an intercooler but that will be easy, just cut the bend off & fit it some where between the intercooler & intake.
T2 Turbo vs Hi-flow T1 comparison.
Photo of Hi-flow T1 turbo before its was smoothend & polished sitting next to a standard T1 turbo.
FS: Hi-Flowed T1 Turbo with 38mm Wastegate & 2.5" Exhaust
-
- Forum Enthusiast
- Posts: 246
- Joined: Wed Aug 18, 2010 9:08 pm
- Location: Waipukurau, New Zealand
Re: FS: Hi-Flowed T1 Turbo with 38mm Wastegate & 2.5" Exhaus
Forgot to mention the center housing is also water cooled but i never hooked the water up to it as its not needed.
-
- Forum Enthusiast
- Posts: 176
- Joined: Thu Nov 20, 2014 4:41 pm
Re: FS: Hi-Flowed T1 Turbo with 38mm Wastegate & 2.5" Exhaus
I would have been keen but I've gone and got my cogs in the works already. Good luck with sale, looks like some good city gear
-
- Forum Enthusiast
- Posts: 246
- Joined: Wed Aug 18, 2010 9:08 pm
- Location: Waipukurau, New Zealand
Re: FS: Hi-Flowed T1 Turbo with 38mm Wastegate & 2.5" Exhaus
Haha yeah well i did say there was a good chance i'd end up selling it early this year but chances are if you waited for me to sell it then i wouldn't have so you done the right thing.
Re: FS: Hi-Flowed T1 Turbo with 38mm Wastegate & 2.5" Exhaus
You recon the hi flowed t1 turbo is better then a recon'd standard t2?
-
- Forum Enthusiast
- Posts: 246
- Joined: Wed Aug 18, 2010 9:08 pm
- Location: Waipukurau, New Zealand
Re: FS: Hi-Flowed T1 Turbo with 38mm Wastegate & 2.5" Exhaus
Better in the way of managing any boost level as I can drop to 6-7psi if I wanted to or up over 20psi with consistency, its just a more reliable/accurate setup but the standard T2 turbo will be better with spool at low rpm & therefore is slightly less laggy but if running a front mount intercooler then its likely the hi-flowed turbo is going to be better at filling that space quicker than a T2 if running higher than stock boost levels.
- blitza
- Forum Regular
- Posts: 69
- Joined: Fri Dec 06, 2013 12:39 pm
- Location: Pukekohe, Auckland
- Contact:
Re: FS: Hi-Flowed T1 Turbo with 38mm Wastegate & 2.5" Exhaus
Still available?
-
- Forum Enthusiast
- Posts: 246
- Joined: Wed Aug 18, 2010 9:08 pm
- Location: Waipukurau, New Zealand
Re: FS: Hi-Flowed T1 Turbo with 38mm Wastegate & 2.5" Exhaus
Yeah mate it still is. What parts were you wanting with it? Just PM me.
-
- Forum Enthusiast
- Posts: 246
- Joined: Wed Aug 18, 2010 9:08 pm
- Location: Waipukurau, New Zealand
Re: FS: Hi-Flowed T1 Turbo with 38mm Wastegate & 2.5" Exhaus
SOLD
Thank you for viewing.
Thank you for viewing.
Who is online
Users browsing this forum: Google [Bot] and 279 guests