Turbo 2 problem
Turbo 2 problem
Recently fitted new head gasket. Was going reasonably well but now just cuts out when try to rev it. Will go up in revs if take throttle up slowly but no instant throttle response.Can anyone help?
Re: Turbo 2 problem
Sigh. How many times do I have to say it ::)
Check for error codes. See the InfoBase for details.
Check for error codes. See the InfoBase for details.
Re: Turbo 2 problem
Hi Kelly
Yeah, what colza said, im sure you will find some info if you search, and use the infobase..
Thats not really enough info for anyone to make a judgement on.. could be one of a thousand things.
Good luck!
Yeah, what colza said, im sure you will find some info if you search, and use the infobase..
Thats not really enough info for anyone to make a judgement on.. could be one of a thousand things.
Good luck!
Re: Turbo 2 problem
I had a similar problem with my T2 a while ago. It turned out to be something stupid as a loose alternator belt. Fixed my problem.
But it still cuts out over 15psi even with the FCD. Hmmm....
But it still cuts out over 15psi even with the FCD. Hmmm....
Re: Turbo 2 problem
Okay, a number of ideas, but have you checked the ignition timing? And the advances, both vacuum and mechanical.
At one stage my mechanical advance was seized and those were the symptoms. The experts blamed it on the fuel injection computer. Had the distributer cap off and noticed no advance movement.
Dismantled the distributer shafts, cleaned them up, greased the springs, reassembled and gave me a tremendous improvement in performance.
Go and check to eliminate this possibility.
Good luck.
Campbell
At one stage my mechanical advance was seized and those were the symptoms. The experts blamed it on the fuel injection computer. Had the distributer cap off and noticed no advance movement.
Dismantled the distributer shafts, cleaned them up, greased the springs, reassembled and gave me a tremendous improvement in performance.
Go and check to eliminate this possibility.
Good luck.
Campbell
Who is online
Users browsing this forum: No registered users and 36 guests