quaife lsd/message for bigelboe,turbo11,turbocab
-
- Donating Member
- Posts: 120
- Joined: Sat Feb 28, 2009 5:24 pm
- Location: perth western australia
quaife lsd/message for bigelboe,turbo11,turbocab
trawling the old forum index and in 2006/2007 noticed some action on these.What was the outcome i.e did they fit a t1,or t2 box,how much machineing was involved.What are they like to drive when fitted.
gingernuts and i purchased them there was a few hundred dollars of machine shop work involved in fitting them and it was worth every freaking cent almost doubled my corner speed even with old tired suspension.
cant wait to see how it goes with my bigelboe coilovers and 215 toyo proxis tyres!
i believe that we got the last two(dont quote me on that)but ime pretty sure they were sitting around on their shelves for years and they had a bit of a cleanup and flogged them off might be worth a try to get your hands on one from memory the part was $800 or so(half normal price) and three hundred or so for the re drilling and welding of the big ring gear thingy.
cheers matt
cant wait to see how it goes with my bigelboe coilovers and 215 toyo proxis tyres!
i believe that we got the last two(dont quote me on that)but ime pretty sure they were sitting around on their shelves for years and they had a bit of a cleanup and flogged them off might be worth a try to get your hands on one from memory the part was $800 or so(half normal price) and three hundred or so for the re drilling and welding of the big ring gear thingy.
cheers matt
If Quaife suggest 2 x QDF3U would make it cheaper, let me know.
Currently listed as £585.00 (Unit price exc. VAT) + shipping
http://www.quaife.co.uk/Honda-Civic-Cit ... fferential
That is about A$1200 + shipping at the current exchange rate.
Currently listed as £585.00 (Unit price exc. VAT) + shipping
http://www.quaife.co.uk/Honda-Civic-Cit ... fferential
That is about A$1200 + shipping at the current exchange rate.
-
- Donating Member
- Posts: 120
- Joined: Sat Feb 28, 2009 5:24 pm
- Location: perth western australia
quaife lsd/message for bigelboe,turbo11,turbocab
Thanks guys,am off to england in a couple of weeks,and hope to pick up a lsd[or 2] for my t2,does anyone know the weight.Also the correct numbers,if the crx lsd fits better with less work that would be good
cheers
cheers
i would think both Civic and CRX diffs would be the same they use the same motor,
any LSD that fits EW motored gearbox ie 84 - 87 civic and crx with the SOHC 1500 not the DOHC will fit its GW box code.
not sure about anything else would guess that GA city and D series would be close, best thing to do in that case would probably be to take a T2 gearbox apart and take the diff head with you so they can compare it and find the best fit.
any LSD that fits EW motored gearbox ie 84 - 87 civic and crx with the SOHC 1500 not the DOHC will fit its GW box code.
not sure about anything else would guess that GA city and D series would be close, best thing to do in that case would probably be to take a T2 gearbox apart and take the diff head with you so they can compare it and find the best fit.
-
- Donating Member
- Posts: 120
- Joined: Sat Feb 28, 2009 5:24 pm
- Location: perth western australia
quaife diff
They have 2 in stock and the price is the same for one or two[for pro t]the weight they say is 5 kg.I fly out june 7 back june 28 via london
-
- Donating Member
- Posts: 120
- Joined: Sat Feb 28, 2009 5:24 pm
- Location: perth western australia
Quaife diff
Picked one up in England,the only small hitch was they forgot the form to get the vat back,so watch out.[the extra 15% hurt]
I hope to find a spare T2 gearbox to fit it up,so I will put it in my T2 towards december when I will do an engine freshen on the T2.
Any instructions on the machining to fit would be appreciated and any leads on a T2 box in Perth would appreciated
I hope to find a spare T2 gearbox to fit it up,so I will put it in my T2 towards december when I will do an engine freshen on the T2.
Any instructions on the machining to fit would be appreciated and any leads on a T2 box in Perth would appreciated
-
- Donating Member
- Posts: 120
- Joined: Sat Feb 28, 2009 5:24 pm
- Location: perth western australia
Quaife diff
hey turbocab/gingernuts,am about to try and get the lsd fitted into a T2 box any more specific instructions instuctions as to what your machine shop did ,thanks
-
- Donating Member
- Posts: 120
- Joined: Sat Feb 28, 2009 5:24 pm
- Location: perth western australia
quaife diff
Thanks turbo cab, i have the drawings just after some rough directions so the gearbox guys don't lathe down the wrong bit
LSD
Craybait,please email me. I want some intel on lsd FOR city box. notsure if is T1-T2 or non turbo.how Do i tell, it is mated to a DOHC ZC 1600.
are the diffs all the same, as i have one out and am prepared to send to Quaife to ge copied, as they told me they would do ten, i want two, so a few more takers and we are a go.
are the diffs all the same, as i have one out and am prepared to send to Quaife to ge copied, as they told me they would do ten, i want two, so a few more takers and we are a go.
Who is online
Users browsing this forum: No registered users and 103 guests