CityTurbo.com

Posted: **Tue Apr 08, 2014 9:12 am**

hey

how hard would it be to get a t2 up and running in this body or am i better with option 2?

thanks alot!!

http://www.trademe.co.nz/Browse/Listing ... =714368726

http://www.trademe.co.nz/Browse/Listing ... =712467075

Posted: **Tue Apr 08, 2014 5:34 pm**

dionallott123 wrote:hey

how hard would it be to get a t2 up and running in this body or am i better with option 2?

thanks alot!!

http://www.trademe.co.nz/Browse/Listing ... =714368726

http://www.trademe.co.nz/Browse/Listing ... =712467075

Option 1: Very hard, different model, different engine etc.

Option 2: Doable, requires using loom, also would have to sort out drive shafts as the T2 runs a slightly wider gearbox which pushes the shafts out (t2 came with wider front track)
Easier would be T1 engine with gearbox, almost a straight drop in, or you could put T1 gearbox on T2 engine, requires flywheel swapped over.

Posted: **Wed Apr 09, 2014 7:29 pm**

Or buy a t2

Posted: **Thu Apr 10, 2014 3:57 am**

i got a t2 but its crashed :/ need a donor body

Posted: **Thu Apr 10, 2014 4:00 am**

have like 100 spares and good running engine.. dont want to scrap it .. hows the transfer into a t1? o

Posted: **Thu Apr 10, 2014 4:01 am**

i have all running gear and looms ecu etc for t2 and i have no t1 parts.. just wanting to see my options was getting to 100 well under 7 seconds for sure with a few mods -

CityTurbo.com

would a t2 engine go in here?

would a t2 engine go in here?

Re: would a t2 engine go in here?

Re: would a t2 engine go in here?

Re: would a t2 engine go in here?

Re: would a t2 engine go in here?

Re: would a t2 engine go in here?