What turbos will bolt onto city engine manifold?
-
- Forum Enthusiast
- Posts: 176
- Joined: Thu Nov 20, 2014 4:41 pm
What turbos will bolt onto city engine manifold?
I'm still weighing up my options for a turbo upgrade, was wondering if anyone could give some insight into what turbos will bolt onto the ENGINE side of the T1 engine? I'm getting a new exhaust made up once I have the new turbo so it doesn't need to fit to the exhaust side, I can get a new dump pipe made up. I know there's the rodeo turbo diesel turbo but that also includes some other fiddling, but still looking into that. Just looking to see if anyone knows what other turbos will work! Get at me
-
- Forum Enthusiast
- Posts: 246
- Joined: Wed Aug 18, 2010 9:08 pm
- Location: Waipukurau, New Zealand
Re: What turbos will bolt onto city engine manifold?
Basically its likely to only be IHI brand turbos that will bolt straight on but i've only used standard T1 & T2 turbos as they are up to the task & do it well, thats why hardly anyone changes them. The G11 turbo Charade uses a IHI turbo & from what i understand it uses the same exhaust flange but im not sure of exhaust & compressor housings, most likely to be bigger than T1 & probably as big as T2. I've got a TD04HL15T turbo from a Mitsi Airtrek which would be a good turbo as its not over kill for the city engine & apparently they spool very well, i was going to use this on a completely new custom build but have backed out of it so will most likely sell it but you will need to do a full on custom exhaust manifold to fit it.
-
- Forum Enthusiast
- Posts: 176
- Joined: Thu Nov 20, 2014 4:41 pm
Re: What turbos will bolt onto city engine manifold?
Was going to need new exhaust manifold for new exhaust anyway. Is the engine flange the same as the t1 turbo? If so could be very interested
Who is online
Users browsing this forum: No registered users and 34 guests