manifolds how tha firetruk

Post whatever you like in here but try to keep it Honda City related!
User avatar
blitza
Forum Regular
Posts: 69
Joined: Fri Dec 06, 2013 12:39 pm
Location: Pukekohe, Auckland
Contact:

manifolds how tha firetruk

Postby blitza » Thu Apr 20, 2017 7:24 pm

so, srsly, how do these manifolds come off, must the inlet be fully diss assembled first?

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Re: manifolds how tha firetruk

Postby James » Tue Apr 25, 2017 1:54 pm

The two manifolds are bolted together, and you have to slide them both off the studs on the head at the same time too. Can't remember exactly how much you have to take apart but I think the intake heat shield or something covers the bolts that hold the two manifolds together so if you want them apart you have to do some dissasembly.

KingCity
Forum Enthusiast
Posts: 246
Joined: Wed Aug 18, 2010 9:08 pm
Location: Waipukurau, New Zealand

Re: manifolds how tha firetruk

Postby KingCity » Tue Jun 06, 2017 4:01 pm

How did you get on Blitza? James is fairly right there, you have to unbolt all the throttle body etc to get to those two bolts how ever you do not need to unbolt those two bolts to remove the manifolds from the head but you still need to remove the throttle body (plus gaskets) to remove the heat shield to expose some of the manifold studs/nuts that need removing to get manifolds off of the head.

User avatar
blitza
Forum Regular
Posts: 69
Joined: Fri Dec 06, 2013 12:39 pm
Location: Pukekohe, Auckland
Contact:

Re: manifolds how tha firetruk

Postby blitza » Sat Jul 22, 2017 7:48 pm

Yeah I managed it, all back on and running, just having difficulty with the boost controller source air. (I took it off the dizzy retard line, cause it was easy, but i think it was consuming too much air and buggering up the timing)

so I'll fix that when I get around to it, otherwise it 'seems' ok, hits boost cut.................

KingCity
Forum Enthusiast
Posts: 246
Joined: Wed Aug 18, 2010 9:08 pm
Location: Waipukurau, New Zealand

Re: manifolds how tha firetruk

Postby KingCity » Mon Jul 24, 2017 5:37 pm

Yeah man its wise to upgrade to a better pressure line dedicated to the wastegate, dizzy line is definitely not a good place to start, at least you are onto it enough to notice that is likely to be the cause.

User avatar
blitza
Forum Regular
Posts: 69
Joined: Fri Dec 06, 2013 12:39 pm
Location: Pukekohe, Auckland
Contact:

Re: manifolds how tha firetruk

Postby blitza » Wed Jul 26, 2017 1:52 pm

never actually worked on something with a proper dizzy before


Return to “General”

Who is online

Users browsing this forum: No registered users and 30 guests