Sirion Gtvi Mags on City

Post whatever you like in here but try to keep it Honda City related!
minime

Sirion Gtvi Mags on City

Postby minime » Tue May 06, 2003 7:39 pm

Hi all :D
             I have a Set of 14" Sirion Gtvi mags (five spoke) and I also have a set of 16" mags for the same car. My Question is will they fit on a City ? ???. as you may have guessed I dont yet have a t1/2 but im working on it. The offset is 4/100 four stud patern.

Should I hang on to these Mags ?

              Thanks for all yo help ;D

crooky
Forum Enthusiast
Posts: 178
Joined: Wed Apr 30, 2003 12:36 am
Location: Canberra

Re: Sirion Gtvi Mags on City

Postby crooky » Tue May 06, 2003 8:50 pm

Fairly sure that is the correct size.  Good score!

MUnity
Forum Regular
Posts: 78
Joined: Wed May 01, 2002 4:46 am
Location: Perth, Western Australia
Contact:

Re: Sirion Gtvi Mags on City

Postby MUnity » Wed May 07, 2003 1:43 am

Stud Pattern (PCD) is 4/100, as it is on the City and just about every small FF car.

Offset is different to PCD. Most FF's have a zero offset rim. They might need wheel spacers to clear the brakes, like my Japanese "I Like Real Sport" rims :D

Smithy
Forum Addict
Posts: 589
Joined: Tue Jan 07, 2003 9:57 pm
Location: Manly West, Brisbane, Queensland

Re: Sirion Gtvi Mags on City

Postby Smithy » Wed May 07, 2003 7:43 pm

How does wheel offset work...
you say fo r aCity its 4/100.

So currently my Beat Wheels (Honda Beat?) are about an inch if that from the dampner.
But dont sit flush with body work...
So if I wanted wheels that cleared the same inside the wheel but another inch or so out...how does the off set change, cause the width is larger but the offset would change to alter just the one side?

: )

MUnity
Forum Regular
Posts: 78
Joined: Wed May 01, 2002 4:46 am
Location: Perth, Western Australia
Contact:

Re: Sirion Gtvi Mags on City

Postby MUnity » Thu May 08, 2003 2:38 am

4/100 is PCD, *not* offset. PCD is the spacing and number of bolt holes in the rim.

This should explain offset:

Image

minime

Re: Sirion Gtvi Mags on City

Postby minime » Thu May 08, 2003 7:00 pm

Hey Guys,

Thats all good info. I have 3mm wheel spacers so all i need is to buy a t2 to try them on.

Munity. Thats some cool info where did you get it from.

Cheers Minime. ;)

kenny
Forum Enthusiast
Posts: 127
Joined: Mon Feb 17, 2003 1:31 am
Location: perth wa
Contact:

Re: Sirion Gtvi Mags on City

Postby kenny » Sun May 11, 2003 1:20 am

hey

i had minime over today to see if the 16" sirion mags fit on t2.

dont they look good 16" mags on a turbo2.

Image

Image

thanks kenny 8)

QikLude
Forum Addict
Posts: 669
Joined: Thu Nov 14, 2002 7:25 pm
Location: Nelson, NEW ZEALAND
Contact:

Re: Sirion Gtvi Mags on City

Postby QikLude » Sun May 11, 2003 8:18 am

nice!

Just needs to be lowered some what  ;)

Jw

minime

Re: Sirion Gtvi Mags on City

Postby minime » Sun May 11, 2003 9:36 pm

hey Kenny, pics turned out cool

Cant wait to get a t2 so all us west oz boyz can go cruzin' . the mags look sik . I should bring over my standard 14" sirion mags and try them out it would look cool.

keep on cruzin. :D

kenny
Forum Enthusiast
Posts: 127
Joined: Mon Feb 17, 2003 1:31 am
Location: perth wa
Contact:

Re: Sirion Gtvi Mags on City

Postby kenny » Mon May 12, 2003 1:05 am

hey

thay would have looked lower if i had moved it a little bit more, but i could not as the clutch is stuffed. i want to get it lowered but just need to get some springs to a place to get some new ones and i dont have the cash right now. apprentice wages suck.

thanks kenny


Return to “General”

Who is online

Users browsing this forum: No registered users and 55 guests