Hi all
I have a Set of 14" Sirion Gtvi mags (five spoke) and I also have a set of 16" mags for the same car. My Question is will they fit on a City ? ???. as you may have guessed I dont yet have a t1/2 but im working on it. The offset is 4/100 four stud patern.
Should I hang on to these Mags ?
Thanks for all yo help ;D
Sirion Gtvi Mags on City
Re: Sirion Gtvi Mags on City
Fairly sure that is the correct size. Good score!
-
- Forum Regular
- Posts: 78
- Joined: Wed May 01, 2002 4:46 am
- Location: Perth, Western Australia
- Contact:
Re: Sirion Gtvi Mags on City
Stud Pattern (PCD) is 4/100, as it is on the City and just about every small FF car.
Offset is different to PCD. Most FF's have a zero offset rim. They might need wheel spacers to clear the brakes, like my Japanese "I Like Real Sport" rims
Offset is different to PCD. Most FF's have a zero offset rim. They might need wheel spacers to clear the brakes, like my Japanese "I Like Real Sport" rims
-
- Forum Addict
- Posts: 589
- Joined: Tue Jan 07, 2003 9:57 pm
- Location: Manly West, Brisbane, Queensland
Re: Sirion Gtvi Mags on City
How does wheel offset work...
you say fo r aCity its 4/100.
So currently my Beat Wheels (Honda Beat?) are about an inch if that from the dampner.
But dont sit flush with body work...
So if I wanted wheels that cleared the same inside the wheel but another inch or so out...how does the off set change, cause the width is larger but the offset would change to alter just the one side?
: )
you say fo r aCity its 4/100.
So currently my Beat Wheels (Honda Beat?) are about an inch if that from the dampner.
But dont sit flush with body work...
So if I wanted wheels that cleared the same inside the wheel but another inch or so out...how does the off set change, cause the width is larger but the offset would change to alter just the one side?
: )
-
- Forum Regular
- Posts: 78
- Joined: Wed May 01, 2002 4:46 am
- Location: Perth, Western Australia
- Contact:
Re: Sirion Gtvi Mags on City
4/100 is PCD, *not* offset. PCD is the spacing and number of bolt holes in the rim.
This should explain offset:
This should explain offset:
Re: Sirion Gtvi Mags on City
Hey Guys,
Thats all good info. I have 3mm wheel spacers so all i need is to buy a t2 to try them on.
Munity. Thats some cool info where did you get it from.
Cheers Minime.
Thats all good info. I have 3mm wheel spacers so all i need is to buy a t2 to try them on.
Munity. Thats some cool info where did you get it from.
Cheers Minime.
Re: Sirion Gtvi Mags on City
hey
i had minime over today to see if the 16" sirion mags fit on t2.
dont they look good 16" mags on a turbo2.
thanks kenny
i had minime over today to see if the 16" sirion mags fit on t2.
dont they look good 16" mags on a turbo2.
thanks kenny
-
- Forum Addict
- Posts: 669
- Joined: Thu Nov 14, 2002 7:25 pm
- Location: Nelson, NEW ZEALAND
- Contact:
Re: Sirion Gtvi Mags on City
nice!
Just needs to be lowered some what ;)
Jw
Just needs to be lowered some what ;)
Jw
Re: Sirion Gtvi Mags on City
hey Kenny, pics turned out cool
Cant wait to get a t2 so all us west oz boyz can go cruzin' . the mags look sik . I should bring over my standard 14" sirion mags and try them out it would look cool.
keep on cruzin.
Cant wait to get a t2 so all us west oz boyz can go cruzin' . the mags look sik . I should bring over my standard 14" sirion mags and try them out it would look cool.
keep on cruzin.
Re: Sirion Gtvi Mags on City
hey
thay would have looked lower if i had moved it a little bit more, but i could not as the clutch is stuffed. i want to get it lowered but just need to get some springs to a place to get some new ones and i dont have the cash right now. apprentice wages suck.
thanks kenny
thay would have looked lower if i had moved it a little bit more, but i could not as the clutch is stuffed. i want to get it lowered but just need to get some springs to a place to get some new ones and i dont have the cash right now. apprentice wages suck.
thanks kenny
Who is online
Users browsing this forum: No registered users and 53 guests