[Need Help] Best BOV Vacuum source.
Posted: Sun Apr 22, 2018 2:39 pm
Hi all,
I've just installed an intercooler and bov on my T1 and it all seems to be working fine apart from the fact the BOV won't vent.
I've opened it up and cut down the spring so its as soft as it can be without being open at idle. A friend has said the problem is there's not enough vacuum to help pull the piston open and has suggested drilling into the intake manifold and running it straight to there rather than teeing off a current vacuum line.
Does anyone have suggestions for the strongest vacuum source??
Thanks!
-Logan.
I've just installed an intercooler and bov on my T1 and it all seems to be working fine apart from the fact the BOV won't vent.
I've opened it up and cut down the spring so its as soft as it can be without being open at idle. A friend has said the problem is there's not enough vacuum to help pull the piston open and has suggested drilling into the intake manifold and running it straight to there rather than teeing off a current vacuum line.
Does anyone have suggestions for the strongest vacuum source??
Thanks!
-Logan.