Time for a rebuild!

Post whatever you like in here but try to keep it Honda City related!
User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Time for a rebuild!

Postby Mike_NZ » Tue Jan 27, 2009 8:53 am

Alright I've finally got round to getting my hands dirty, and have had a very productive weekend stripping my car out.
The only things left in there now are parts of the steering, brake, and fuel systems, and they can all come out this coming weekend.
Image
Image
Image
Engine out.
Image
Nicely bent fin on the compressor wheel :(
Image
Rust in the usual places.

Apart from the rust at the bottom of the A pillars there doesn't seem to be too much major, just a few patches that will need cutting out.
That may change once I get the paint off, but I guess I'll find out soon enough.

I'm starting to have some doubts about the engine. While it would be nice to keep the original motor, all those vacuum hoses and
overly complicated throttle assemblies and emissions control systems seem like more trouble than they are worth.
Then there's the CVCC which makes engine management difficult unless I run with the stock ECU, in which case I will need to keep
at least some of the silly vacuum hoses.

Now might be the time to seriously investigate other engine possibilities.

User avatar
3GCVC
Forum Addict
Posts: 391
Joined: Sun May 27, 2007 5:17 pm
Contact:

Postby 3GCVC » Tue Jan 27, 2009 11:29 am

have a look at the engine from a 2G Prelude 1985-1987 BA1 chassis NOT the 4WS BA5. i think the B20A from the 2G would possibly go in nicely 160ps 19.5kg/m torque is a lot of grunt for a city though.

Or you could just get over the obvious issues with the ER5 its not nearly as bad as you think, some of the vacume lines can be removed, there is work being done on the stock ECU which seems like it might work well.

Your main concern is getting rid of all that rust it looks ok in places the more you look the more will pop up, good luck.

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Tue Jan 27, 2009 2:10 pm

If you have a welder and want a nice engine thats going to pull hard for years then I would put a d16 in. They are fantastic engines, really torquey and smooth but still revv out and don't run out of breath until like 7000rpm. Either keep it na they are really nice to drive and they are 130hp and NA so significantly quicker than a stock T2, or turbo it if you want to keep boost and keep buying tyres.

QikLude
Forum Addict
Posts: 669
Joined: Thu Nov 14, 2002 7:25 pm
Location: Nelson, NEW ZEALAND
Contact:

Postby QikLude » Tue Jan 27, 2009 2:37 pm

Aftermarket computer the stock city motor, and make it not so stock :)

Dont forget the torque outa these things is really what makes them special and fun 8)

The standard city stuff isnt too bad once youve got your head around it and asked or read a few dozen posts in here, i think i might go the aftermarket computer way though to chase a little bit more power and i hate distributors and the hasstles they bring, so a link running batch injection and wasted spark makes more sense to me...

Cheers

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Tue Jan 27, 2009 6:06 pm

Have you driven an EK (not sure about the earlier ones) civ with a d16? They have a similar torquey feel to the city motor, really nice to drive. Can putter along in any gear at any time almost and pull strongly from idle.

Aftermarket is all good but its very hard if at all possible to get a factory like idle and light cruise out of the cheaper aftermarket ECU's, they have far fewer corrections and smaller tables than the factory ECU's. Of course you can out of things like Motecs and hours and hours on the dyno but It's nice that Honda has already done this :D My goal with the ECU modifications when I get there eventually is to get the best of both worlds. Almost I am looking at building a fairly simple add-on board to make the spark programmable and just run fixed timing on the distributer like later Honda motors do, wouldn't be much extra to convert to to wasted spark but yeah, a while away.

QikLude
Forum Addict
Posts: 669
Joined: Thu Nov 14, 2002 7:25 pm
Location: Nelson, NEW ZEALAND
Contact:

Postby QikLude » Wed Jan 28, 2009 2:20 pm

bigelboe wrote:Have you driven an EK (not sure about the earlier ones) civ with a d16? They have a similar torquey feel to the city motor, really nice to drive. Can putter along in any gear at any time almost and pull strongly from idle.

Aftermarket is all good but its very hard if at all possible to get a factory like idle and light cruise out of the cheaper aftermarket ECU's, they have far fewer corrections and smaller tables than the factory ECU's. Of course you can out of things like Motecs and hours and hours on the dyno but It's nice that Honda has already done this :D My goal with the ECU modifications when I get there eventually is to get the best of both worlds. Almost I am looking at building a fairly simple add-on board to make the spark programmable and just run fixed timing on the distributer like later Honda motors do, wouldn't be much extra to convert to to wasted spark but yeah, a while away.


I definatly wouldnt do a cheap aftermarket ECU, dont a lot of work with Link ECUs (from early to new) and although u might shell out $1600 with a good tuner you should get a perfect "factory feel"
Just did an angry evo rally car recently and we got it running so well even the wife could drive it nicely down the road. (bar the clutch)

Cheers

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Wed Jan 28, 2009 3:46 pm

Mnn fair enough.

The other option I though of is going for an EL motor and ditching CVCC. Then it bolts in, is a nice period upgrade and you can run a nice simple manifold and stuff.

It wouldn't be the cheap option tho, you would want to rebuild it and make some mods so it could take the boost, then get an ECU and get it tuned and stuff, but you must be rolling in it now Mikey :P A year of practicing and now Gen can pay the rent and food :D

User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Postby Mike_NZ » Thu Jan 29, 2009 7:01 pm

The other option I though of is going for an EL motor and ditching CVCC. Then it bolts in, is a nice period upgrade and you can run a nice simple manifold and stuff.

How nicely does it bolt in? Same mounts nicely?
I was planning on doing a full rebuild on whatever engine I end up using, and if it's not the stock engine I'd probably run it with some sort of aftermarket engine managment.

User avatar
3GCVC
Forum Addict
Posts: 391
Joined: Sun May 27, 2007 5:17 pm
Contact:

Postby 3GCVC » Thu Jan 29, 2009 7:12 pm

Is there a non CVCC head that goes straight onto the ER block that way an aftermarket ecu can be ran easily?

Either that or you could look at an EW engine 1500 SOHC

or a browntop ZC

would probably be a crime to take the Turbo from a T2

User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Postby Mike_NZ » Thu Feb 12, 2009 12:58 pm

Progress is slow but steady, I have removed EVERYTHING from the car that can be removed.

Image

Image
Started cleaning up and cutting out rust.

Image
Cleaning out the wheel arches.

Image
Found some rust in the top left corner of the windscreen.

Image
When I get sick of rust or underseal I have a go at scraping all that crap off the floor.

Not 100% on where I want to go now, if it would be better to fix up as much rust as I can now, then get it sandblasted properly - hope there isn't too much rust I've missed, then paint it. Or should I get it fully sandblasted now, patch it up once I know where all the problems are, then paint it after that, given the fact that it will be sitting around bare for quite some time?
Last edited by Mike_NZ on Tue Jul 07, 2009 10:55 am, edited 1 time in total.

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Thu Feb 12, 2009 1:12 pm

Sandblasting will show you where rust was you would otherwise miss as it will push through thin sections. After you have it blasted you could shoot it with a quick couple of coats of primer just so its not bare that you can sand off or whatever later. If you use lacquer primer you could almost just wipe it off with thinners later.

User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Postby Mike_NZ » Thu Feb 12, 2009 2:36 pm

Or, since I was planning on POR15ing the whole car, I could mask off the bits that need fixing, paint everything else with the POR15, fix the bad bits and paint them after. That might be a good way of dealing with the prolonged metal exposure problem.

User avatar
James
Moderator / Donating Member
Posts: 3092
Joined: Wed Apr 09, 2003 1:59 pm
Location: Putaruru
Contact:

Postby James » Thu Feb 12, 2009 7:52 pm

That sounds like a wise move. Sorta wish I had just done that actually. I guess I still could get the whole shebang bead blasted then just POR 10 it. Would save me a bit of farking around.

bestsx8

Postby bestsx8 » Thu Feb 12, 2009 10:57 pm

Ups, can't see the process photos :(

User avatar
Mike_NZ
Donating Member
Posts: 127
Joined: Mon Dec 13, 2004 9:53 pm
Location: Hamilton, New Zealand

Postby Mike_NZ » Tue Jul 07, 2009 11:09 am

Bit of progress, the roll cage is coming along very nicely, should be done by the end of this week, hopefully.
Now keeping an eye on trademe for some suitable seats, and we'll be all go.

Next question is one of paint, someone at work suggested painting it John Deere green, obviously with yellow wheels. I think that'd be pretty funny, but I'm not feeling strongly for or against the idea.

I did a rough mock up using a picture of Brendan's car:

Image

The guy doing the cage thinks it'll look good in white, again I don't really mind, though I do think the John Deere is pretty funny.

Anyone else have any other thoughts on colour?


Return to “General”

Who is online

Users browsing this forum: No registered users and 22 guests